1)Description

Wireless set to start alarm function,easy to use.

Anti-interfere function. When someone to interferes it with same frequency, the control unit will activate siren to alarm.

Support anti-decode with remote control.

6 programmable defense zones available,with status LED. The control panel can register 99 sensors and detectors.

Have the function of one-key arm. User can can start home arm or out arm freely by keeping pressing one key on remote control to satisfy your need.

It stores 2 groups of monitoring center and 6 groups of user phone numbers to dial out and play the recorded message if there is an alarm.

Can arm/disarm with remote controller or keypad on the control panel.

Can arm/disarm/listen-in by calling the host phone number( The phone number of control panel).

Have the function of reminder for circuitry failure. With function of telephone anti-cutting warning, when thieves cut the telephone line maliciously, it will alarm.

The function of record sound.

2)Technical Parameters

Power supply:AC=220V±10% DC=9V -12V

Inner Power: Ni-Mh battery, DC=7.2V
Static Current:I ≤50mA
Alarm Current:I ≤300mA
Wireless Receiving Sensitivity:5mV/ m
Outer Alarm Siren Volume:110db
Working ConditionTemperature-10~40
Humidity:≤90%
Capacity for Wireless Device:99pcs
Wireless frequency: 433 MHz (If you need 315Mhz, Please contact us.)

3)Package

1*PSTN main panel

1*wire siren（607）

1*wireless door sensor (101)

1*wireless PIR detector（521）

2*wireless remote controller(131A)

1*adapter(USA EU UK or AU adapter)

1*user manual