VIP(vacuum insulation panel) has been proven to exceed its performance than the conventional insulations by far. Vacuum Insulation panels are our new high- efficient thermal insulation. It is created by inserting the open celled filler into a centralized sealed barrier. The superfine fiberglass core material provides the structural strength and resistance to heat transfer.

Advantages:
7-10 times better insulation value then conventional insulations
Thin wall, small volume, lightweight
Extremely low thermal conductivity 0.005w/m.k
Resistance to heat transfer among the gas molecules
Non-ODS material
Not harmful for the environment
Meets all insulating requirements

Specifications:
1) Compressive Strength: 0.14MPa - 0.25MPa
2) Thickness: 10 - 35mm
3) Maximum dimensions: 1,600 x 700 x 35mm
4) Core material: superfine fibreglass
5) Thermal conductivity: less than 4mw/m.k (under standard environmental condition:
ambient temperature 24°C, relative humidity 50%)
6) Density: about 230kg/cbm
7) Internal pressure: 0.1Pa
8) Operating ambient: -50 ~70°C
9) External tolerance of VIP: 1mm
10) Packing: carton with foam and air bubble film
11) Service life: 10-15 years under standard environmental condition

Applications:
Cold insulated equipments of different industries
Shipping containers
Spaceflight/aviation
Communication/transportation
Medical refrigerators and freezers
Marine and recreational refrigeration vehicles
Civil refrigeration equipment
Insulation for construction