Equipment Features
Well-known water cooling spindle, high precision, long life time, steady working, easy to start up.
Thicken square pipe structure, well welded, no distortion for whole structure.
Adopt Taiwan square orbit, double slippers. Bearing heavy, working steadily high precision, and long life time.
DSP controller system with USB interface, working without connecting with computer during working and easy to control.
Software: CAD/DAM designing software e.g. Type3/ARTCAM/Castmate/wentai etc.
Vacuum Table with 6 vacuum zones, which can adsorb different sizes materials.
Options for vacuum pump: vacuum pump made in china or No-oil vacuum pump made in Germany. Easy to operate by pressing one key.
Adopt high speed stepper motor and drivers,and two motors for Y axis. Max speed is 35M/MIN.
Technical-parameters
Model
|
M25-B
|
Option
|
XY working area
|
1300*2500mm
|
<2000mm×4000mm
|
Z working area
|
200mm
|
<450mmm
|
Table size
|
1480×3000mm
|
|
Max feeding
|
>35m/min
|
|
Work-holding
|
by suction vacuum table
|
|
Processor
|
DSP/Frequency100MHz
|
|
Interface
|
USB
|
|
Command
|
G code*.u00*.mmg*.plt
|
|
Surroundings for software
|
Nc studio
|
DSP A11
|
Power(not include the spindle)
|
1840W
|
|
Power
|
380V/50Hz
|
|
Main axle power rate
|
4.5KW
|
3.0/3.5/6.0KW/Water/Air-cooling(Option)
|
Main axle rotating speed
|
0-24000rpm
|
(Air-cooling spindle with 18000 rpm)
|
Work Mode
|
Stepper
|
Servo
|
Contact info:
Walter zong
Tel:86-13205427306
Email:walter@drklaser.com
Skype:dereklaser2
Web:www.drklaser.com
|