FEATURES
Magnetic Stripe reading Triple tracks.
Customized Front Bezel is available at option
RS-232C interface with a HOST.
IC Card read and writes.
SIEMENS & ATMEL Memory IC Card read and write
The IC contact is designed to minimize scratch on the IC card.
Mag. Head and Chip contacts are located on the opposite side.
The CP_8 location is available.
The CP_16 location is available at option.
Support T=0 and T=1 protocol.

SPECIFICATIONS
Card Standard : ISO 7811, ISO 7816, CP-8
Mag. Track No : I ( IATA ), II ( ABA ), III ( MINTS )
Mag. Reading Method : F2F ( FM )
Mag. Recording Density : 210 BPI ( I, III ), 75 BPI ( II )
Mag. Recording Capacity : I ( IATA ) - 79 Characters.( data 6 bit + odd parity 1 bit ): II ( ABA ) - 40 Characters.( data 4 bit + odd parity 1 bit ): III ( MINTS ) ? 107 Characters.( data 4 bit + odd parity 1 bit )
Card Thickness : 0.76 ± 0.08 mm
Input voltage : + 5V DC ± 5%
Ripple : Less than 50 ㎷p-p
Operating : Less than 700 ㎃
IC Contact Resistance : Less than 0.5 Ω
Time for motor Operation : 50 msec ( Approx. )
Operation Locus : Indoors Only
Mag. Card Feeding Speed : 15 ∼ 80 cm/sec
Life-time : HEAD - Min. 500,000 CyclesIC
CARD CONTACT - Min. 350,000 Cycles.(1Cycle = 2Pass)