|
Nano Ion Battery Beauty Moisturizing Sprayer
TM-MR-014
|
| Nanometer spray device filling water,5 Min, 30 second/10times |
| White collar worker: stay in air-conditioned room, the weather changes, computer radiation, stress, lack of sleep, the passage of time |
| Airline stewardess: air drying, with makeup, instrument of the radiation, the long flight, two environment, dramatically changes |
| Model: flashlight, outdoor, ultraviolet, thick makeup, sun exposure, work fatigue |
| |
| Nano water molecules through the skin cuticle repair after sun skin, nourish and hydrate |
| Summer super moisturizing product |
| More essential than sunscreen summer equipment |
| Whenever and wherever possible, moisturizing, best mobile beauty salon |
| Mini spray instrument - rapid permeability, medium does not contact the skin (the fastest and most effective |
| |
| Kind Remind: |
| Will slide down, the nozzle will automatically send beauty spray, 30 seconds will automatically stop (on the makeup before use from the face of about 5 cm, on the makeup head from the face of about 15 cm use) |
| 1. Nozzle: delicate smooth, highly texture |
| 2. Cover: streamlined design, chic |
| 3. Tank cover: the overall buckling, tight security |
| 4. Design of tank can be disassembled, convenient cleaning |
| 5. Tank plug: intimate close, prevent liquid overflow |
| 6. Outer cover: cover buckled tightly |
| 7. Open the battery cover into the 4 quarter number seven carbon batteries |
| |
| 1. Why was rear cover broken? |
| This section machine parts more to prevent loss; tank cover and body is one whole so do not abundance break. The maximum angle of 90 degrees |
| 2.The make-up water cannot be used |
| This machine is nano spray nozzle exit, extremely delicate, so on the make-up water demanding, oily, viscous, or particles, remember not to use make-up water. |
| 3. Why not spray slip off the machine? |
| Usually have the following three conditions, sliding spray machine, but no spraying |
| |
| 1.The outlet water |
| 2.Battery power shortage |
| 3.Slide machine poor contact |
| Water spraying port, with a cotton swab wipe, shake machine, exhaust air, spray will smooth |
| The electricity shortage. Light does not represent adequate power, please replace the battery |
| Sliding the sliding cover light does not shine, please check whether the battery is installed, avoid contact with not bright |
| 4. Error to use make-up water, how to clean? |
| 1. Open the back cover to remove the silica gel plug |
| 2. Remove the transparent water tank |
| 3. Use cotton swabs coated with alcohol scrub spray mouth |
| 4. Flush the tank with water |
