Surface treatment : hot dip galvanized

Zinc thickness: 86μm

Technology: press ,cut ,drop forged

Load : 70kn/120kn/160kn

Voltage : 11kv/33kv

Life time: more than 30years

Used on : overhead line

Color: Silver

advantage: good price with high quality

Experience: More than 12years.

Used with: ball eye ,ball socket , tension clamp, U bolt

Export to : Allover the world

Certificate : ISO9001, SGS

Product description:

electric power fitting Dimensions:

The dimensions on the drawings are the final dimensions after the hot dip galvanization. The design of the fittings is indicative; however the mentioned dimensions on the drawings are the critical ones.

electric power fitting GALVANIZATION

The fittings shall be delivered hot dip galvanized according to the following specifications:

• The Zinc of the electric power fitting  that shall be used shall have the quality of minimum category prime western according to  the category Zn 98.5 according to ISO-1461.
• Then washed out with water and then flux treated and dried out.
• The hot dip galvanization shall be made in a Zinc bath of temperature 450°C and of Zn-composition min. 98,5%.
• The galvanization thickness of the electric power fitting shall be in average 80m thick! On an isolated piece or on a small part of the surface the thickness can be a little lower, however on all pieces and on all surfaces the minimum thickness shall be 78μmand the average weight in relation to the galvanized area shall be 610 gr/m2.