1. High availability and efficiency
2. Easy operate and maintain
3. Lower the cost and waste 
4.The output plate with smooth surface, no need sanding .
5.1.5 times efficiency improve than normal band saw machine

1. Automatic multi cut-off machine, can process wood diameter from 100-250mm . processing 

length  from 500-1500mm;

2. The min thickness of the marginal board should be at least 50mm. After reaching the limit of 

cutting thickness, the clamping setting will loosen the tailing of log and restore automatically;

3. PLC intelligent man-machine interface control system, can set clamping, feeding, returning, 

left and right moving. Also can set processing width and speed(2-10m/min);

4. It can set five types of width, such as 5mm, 10mm, 15mm, 20mm, 25mm and so on;
5. Min.working thickness is 8mm.