Dental Zirconia ceramic block 

Thickness:10mm 12mm 14mm 16mm 18mm 20mm 22mm 25mm 
Shape:Round with diameter 98mm 95mm 100mm 

DESCRIPTION: 
1.Polished the appearance 
This depends on the machining progress which you have choosed.Pls note the followings: 
a. Note the distances of the milling burrs running in the unit time. Please do not too fast. 
b. Change the milling burrs in time. 
2.The height of work support 
Before the Sintering.the work support is at least 0.7mm. And after the sintering. it should not less than 0.4mm. 

For more detail, please contact  the following website as  www.sundentmedical.com