~A new generation Inverter DC Metal Manual Arc Welding machine manufactured by Jinan Huaao electric welding machine Co., Ltd. adopts the advanced soft switching inverter based on the core fitting of imported infineon IGBT and microcrystal magnetic cores with the 20KHZ inverter frequency. The product owns high load duty cycle with arc igniting current and current thrust control function. It owns the advantages of automatic compensation function for voltage fluctuation, stable arc, even weld crater, little splash and good weld formation. And on the other hand, it first applies the digital circuit control technique for the purpose of quality of welding, which not only reduces the weight and volume much and improves the portability but simplifies the operation of facility, getting good arc ignition and welding performance to improve the welding precision.

Due to adopting the digital circuit control, the pre-welding set value can be displayed by the number. The actual value is displayed during the welding, and the value is locked automatically after welding, which makes convenience for presetting and control of welding criterion.

Its top inverting frequency of 20KHZ reduces the current fluctuation influence for arc much, which makes arcing and arc static current very low (20A). The arc burns steadily and quietly with dense arc and small heat affected zone. Considering all aspects of factors influence for the welding machine in designing, the advanced design is adopted in some minutiae. The inner bare line adopts the insulating varnish with high insulating strength, and the shell adopts the waterproof design for protection that can cope with r ed environment. In addition, fully considering the economy of welding machine use in the design, the power consumption efficiency of all digital TIG welding machine reaches 90%, and the power factor reaches 0.89. Finally these serials advanced design passes the strictest test and reaches the following standard: CCC- meets the GB15579.1-2004 standard; shell protection grade: IP21S, suitable for field use, insulation grade: F, waterproof and preventing foreign materials.

Brief introduction to characteristics: 
● Striking current continuously adjustable
● Thrust current continuously adjustable
● Welding current continuously adjustable
● Digital display current and voltage
● Overheat indication and overload protection

Product model
 
ZX7-2000
 

Rated input voltage AC(V)
 
Three-phase 380
 

Power frequency (HZ)
 
50/60
 

Rated input capacity (KVA)
 
110
 

Output open circuit voltage (V)
 
74±5
 

Current range (A)
 
90-2000
 

Thrust current range (A)
 
90-500
 

Start arc current range (A)
 
90-600
 

Rated cyclic duration factor (%)
 
100
 

Weight (kg)
 
175
 

Dimension (mm)(L*W*H)
 
870*405*1080