UHFP-A Ultra Highflow Filter Cartridge

Features & Benefits
• Gradient pore structure
• Up to 110M3/H flow rate per filter cartridge 
 for water filtration
• Maximum 50% reduction of filter system
• 20", 40" and 60" lengths are available
• All contaminants can be removed off inside the 
 cartridge by the inside - out flow direction

INTRODUCTION:

Applications

• Prefiltration of RO,Pretreatment of sea water Desalination;
• Condensate water filtration,hot water recovery in power generation;
• API, solvents,and water filtration in BioPharm Market;
• The filtration of bottled water, high Fructose, edible oil, soft drinks,and milk;
• Paints and coatings,Petrochemical,Refineries;
• Microelectronics,film,fiber and resin;

Material Of Constructions

• Filter media: Pleated glass fiber, Pleated PP, Melt Blown PP 
• Support/Drainage: Polypropylene(PP)
• End caps:Glass fiber reinforced Polypropylene
• O-ring seal:EPDM, NBR

Recommended Operating Conditions

• Maximum Operating Temperature: Pleated glass fiber 121℃ / Pleated PP 82℃ / Melt Blown PP 65℃;
• Maximum Differential Pressure: Pleated glass fiber4.0bar / Pleated PP4.0Bar / Melt Blown PP2.5Bar ;
• Recommended Change out Differential Pressure: 1.5Bar at 20℃
• S ested Flowrate of water: 250 - 660LPM/20"L; 500 - 1,300LPM/40"L; 800 - 1,900LPM/60"L

Cartridge Dimensions

• Removal Ratings:1um, 4.5um, 6um, 10um, 20um, 40um, 70um, 100um
• Outside Diameter: 6"/152mm
• Length: 20"/528mm, 40"/1022mm, 60"/1538mm

Ordering Guide