Email: sales@hwashi.com

Tel/Whatsapp: +8618680389568

DESCRIPTION

This condenser welding special machine is customized for welding condenser as well as wire mesh. 

In order to increase efficiency and production rate, the machine is designed as two feeding fixture system, automatic wire feeding system, automatic mobile system, automatic welding system, and cooling system.

The welding process is as follows,

1)    When start working, the welding fixture will firstly enter into the automatic wire feeding area to complete the bottom layer automatic wire feeding;

2)    Then the fixture will move back to the manual loading area, the operator needs to put the S-shaped copper tube onto the bottom layer wire;

3)    Afterwards, the fixture will move to the automatic wire feeding area automatically to complete the upper layer automatic wire feeding;

4)    Then, the fixture will move forward to enter into welding area to complete welding process.

5)    After welding, the fixture will move back to the unloading area. The fixture will be loosening through vibration.

6)    At last, the fixture will return to the loading area for the operator to take out the work piece and start the next welding process.

In order to improve the efficiency, the machine is designed with both sides feeding rack.  The welding process for both sides is the same which will take turn to work.