Your Waterproof Camera Case, Fit for Canon G16

• Meikon waterproof camera cases for Canon G16 designed just for you! 
• Our housings feature new design, high quality and  waterproof, dust proof, sand proof, rain proof and snow proof.
• Depth rating:40M
• Up to 0~40°C(32-104°F) 
• Touch screen compatible.
• Super clear lens for optimal picture quality.
• Come with an attachable strap.
• Certificates: CES and IPx8.
• Warranty:2 years
• OEM/ODM order is acceptable
• More discounts for wholesale!

How to use the case:

Prepare the waterproof case:

1, Check the waterproof case

2, Remove the waterproof case seal from the mounting groove

3, Check the waterproof seal and the mounting groove

4,Apply grease to the entie waterproof seal then attach the seal

5, Close the waterproof case

6, Hold the waterproof case in water 

7, Wipe the exterior of the waterproof case with a soft, dry cloth

 

Prepare the camera:

1, Insert a memoery card if neccessaryand attach a fully-charged battery pack

2, Remore the grip and the optional wrist or shoulder strap, if attached

3, Turn on the camera and change in advance the camera settings as neccessary 

4, TUrn off the camera

 

Secure the camera in the case:

1,Make sure the button and zoom lever are operating correctly

2, Attach the wrist strap to the waterproof case

  

Remove the camera:

1, Make sure the catch is securely closed

2, wash the exterior of the waterproof case in fresh water

3, wipe the exterior of the waterproof case with a soft, dry cloth

4, Close the waterproof case and fasten the catch

5, Close the waterproof case and waterproof seal

 

Check the waterproof seal:

1, Remove the waterproof seal and wipe off the grease

2, Check the waterproof seal

3, Check the mounting groove on the waterproof case

 

Cleaning the waterproof case:

1, Close the waterproof case

2, Wash the exterior of the waterproofcase in fresh water

3, Remove the waterproof case from the ware make sure no debris remains on the exterior

4, Wipe the exterior of the waterproof case with a soft, dry cloth and open the case

5, Remove the wp seal,  the debris on the contact surface and on the mounting groove

6, Wipe the interior and exterior of the wp case with soft dry cloth

7, Air dry the wp case in a shaded place