The benefits of PteK RCHF3
PteK RCHF3 charger is the faster and safer method to recharge batteries in 2 hours.
In fact you do not need any dedicated battery room any more, you also can avoid
all the relative maintenance problems and the time recovery, this means less costs
for maintenance and infrastructures and less battery packs.
Excellent also with batteries having a big capacity you can quickly charge in short
time, as during the lunch time or when the vehicle is in standby.
so you don’t have to replace batteries in order to increase the work time.
The three-phase PteK RCHF is realized with full switching technology with
microcontroller digital control, it is a flexible and reliable devices.
The high efficiency assures a remarkable energy saving optimizing the economic
benefits permitting to amortize the investment for the high
frequency choice in a short time.
It is also suitable for recharge all kind of batteries (leadacid
gel, sealed, AGM batteries, etc…) and allow selecting a specific
charge curve or configuring easily a suitable curve for the type
of
battery.
PteK RCHF is characterized by a negligible residual output
ripple, it also integrate the input and output protections and
is equipped with an over-temperature control both on the
primary side and the secondary side of the converter.
With a wholly programmable control unit, easy-to-use with the
user-friendly graphic interface displaying all the parameters,
historical data of the charge cycles executed, alarms, data
plate and all general information concerning the device.
The interface also allows setting all the charge parameters,
selecting the charge curves, setting the clock and activating all
the optional functions.
PteK RCHF is equipped with a monochromatic graphic LCD
display of 64x128 pixels.
The control unit can be connect it to a personal computer.
An interface software for PC is available permitting a whole
configuration of the PteK RCHF, in order to check and monitor
all the functions in real time. The software is equipped
with a specific tool for the charge curve configuration and
customization.
Input Voltage: 400 Vca ± 15% three-phase, input Frequency: 50 – 60 Hz,
efficiency: ~ 90%, operating temperature: – 20 to + 50 °C, current drawn by the
Battery: 0 A, if network electrically bonded, protection against Output Short-circuit,
protection against polarity reversal, thermal Protection Semi-conductors, input
Protection, charge curve: programming and settings, displaying and messages with
monochromatic graphic LCD display, thermal compensation with optional probe,
ventilation with forced air circulation, metallic body with these dimensions: 830 x
500 x 500 mm, protection IP20, in conformity with the Low Voltage directive 73/23/
CEE and the EMC and directive 89/336/CEE and their successive amendments.