Product Description

Mixing Tank Introduction 

Liquid mixing tank for mixing liquid. With propeller mixer, anchor mixer, emuslifier or homogenizer
Jhenten is professional manufacturer for all kind of stainless steel tanks, such as mixing tank, reactors, storate tank, fermentor, bioreactor and CIP.
Jhenten is the one of the biggest manufacturer for stainless steel tank in China, who has three factories in Shanghai.

Mixing tank Application:
It is used for mixing all kinds of liquid products in pharmaceutical, food, chemial and biological fields.


Construction of mixing tank 

We have different kinds of agitators

Bottom magnetic agitator with propeller impeller, speed from 50-400rpm or 50-800rpm. This kind of agitator is mixing thin viscosity, such as eyedrop, injection, CIP liquid, water, etc...

Top mechancial agitator with propeller impeller, speed at fix 71rpm or adjustable 20-200rpm or special requirement. This kind of agitator is mixing syrup, injection, blood, oral liquid, culture medi a, etc...

Top mechanical agitator with anchor or frame impeller, speed is from 10-70rpm. It is mixing higher viscosity, such as sediment or viscosity oral liquid, etc...

Top emusification homogenizer, speed max 2900rpm for small vessel, 1480rpm for bigger tank. This kind of agitator is mixing most high viscosity, such as suspension, oil, fat emulsification, etc...

Bottom emusification homogenizer, speed max 2900rpm for small vessel, 1480rpm for bigger tank. This kind of agitator is mixing most high viscosity, such as suspension, oil, fat emulsification, etc...

One tank can install one agitator, if client need, one tank can install two agitator together.

Mixing tank Product technical description

Specification: 10L~30000L
Material: SS316L or SS304
Surface finish: Inside surface is Ra0.28~0.6μ M by mechanical Polish. (passivation or electropolish are optional). Outside surface is Ra0.6~0.8μ M by satin finish.
Pressure: ATM or pressure vessel (-0.1~1Mpa)
Structure: Single layer vessel, vessel with jacket, vessel with jacket and insulation
Jacket type: Dimple jacket, full jacket, or coil jacket
Insulation material: Rock wool
Components can be equipped as request:
Standard components: Manhole or handhole, sight glass, cleaning ball
Optional components:
Vent filter with Pall cartridge or China brand cartridge
Temp. Gauge, display on the gauge directly on the vessel
Temp sensor PT100, digital display on the control cabinet by instrument
Temp sensor with control for heating and cooling
Level gauge with digital display on the control cabinet by instrument
Load cell
Valves

Manufacture standard for pressure vessel: GB150-1998, ASME with U stamp or PED/23/EC with CE mark