Hoist general
Lifting capacity : 3.2t-20t
European optimized design, light dead weight
Silent operation
Low hoist frame reduces the height of building and saves construction cost
Modern integration design which combine motor together with fan, reducer, rope drum and brake, compact structure
Optimum cooling with good cooling performance, cooling is improved up by 30%, resistant to a temperature rise of 170 ° C 
Ambient temperature:  -10℃– +40℃
Epoxy zinc-rich painting for one bottoms and two sides of 120μm thick, to achieve a long lifespan, beautiful appearance and good luster

Lifting motor
Asynchronous squirrel cage motor (Synchronous speed reaches up to 3000rpm)
Two-speed pole changing or frequency conversion for stepless speed control
Heavy duty, cyclic duration: 60% ED
Protection class: IP54, Insulation class: F

Lifting Reducer
Aluminum shell, light dead weight and good sealing condition
Semi-fluid grease lubrication, life cycle design, maintenance free
Helical gear with hard tooth face
Lifting brake
DC Electromagnetic disc brake
Self-adjusting brake pad, self-compensation wear, alarm when the brake pad is not thick enough

Excellent integration design of the regular closed brake and motor with good synchronization. Safe braking torque (at least 1.8 times) can effectively prevent the hook from slipping.
Fully covered, dust proof
Heavy duty
Large Frictional contact area, adjustable brake toque
Asbestos-free and environmentally friendly friction piece
Brake lining life: not less than 1 million times under normal use, emergency braking is not lower than 500 times

Rope Drum
Large diameter rope drum, Diameter(rope drum)/ Diameter(Steel wire rope) =46, to extend the rope’s lifetime
Ensures accurate load positioning, hook drift +/- 4mm per meter
At least two rings of rope are around the drum while the hook is at the lowest position
Rope guide is made of spheroidal graphite cast iron, with wear resistant and heavy-duty
A spring operated guide roll in the rope guide to prevent the steel wire rope from going out of the groove effectively

If you want to know the price of CH Series Assembly Manufacturing Electric Hoist for Single Girder Crane

, please send an E-mail to us:

inquiry@clescrane.com

If you want to know more information about CH Series Assembly Manufacturing Electric Hoist for Single Girder Crane, please visit our website:

http: //www.clescrane.com