The brife using instruction of butter brick machine  

   Brick cutter machine belongs to building machinery, which is mainly for the production of brick factory standard brick, the using of hollow bricks.  Brick cutter machine is used for the surface of hard stainless steel, rub resistance of mud sliding friction, life of the ironwork steel table-board is long several times as others, lighten the loam, fuel efficiency is 30%. Easy to change after wear, avoid scraping. In addition to the table-board, characteristics of other parts are same as the standard. 

The structure characters of cutting brick machine.

  1.Automatic preventing deflected device: never obliquely cut, do not need to adjust.

  2.Stainless steel drum power mesa, clay-strip automatic, accurate positioning, avoid wasting mud than ordinary flat mesa clean oil saving 70%-100%.

  3.Stainless steel push layout: gap wear-resisting, 3 times lifespan more than ever.

  4.Orientation Angle + guide arc: make the wire into the slot accurately; reduce the broken wire by an average of 70%.

  5.High wear-resisting material craft: guide stick for hard chromium plating, with composite guide bearing, small resistance and long service life.

  6.Buffer storage: absorb returning shocks and push returning impact energy into power.

  7.High strength, large thrust: use coal gangue, shale as raw material of hard plastic, a half-hard plastic clay.

  8.Suitable for all kinds of sludge soft hard plastic clay bar: oil-saving effect is prominent for the high sediment concentration and so on inferior soils. Too soft mud should be declared in advance, using encryption roller table.

The advantages and performances of cutting brick machine

1.Cut section vertical mud, no mud, fully automated operation, high efficiency and energy saving

2.Program-controlled pneumatic type vertical strip cutting machine

3.ZD (hard mud) type vertical strip cutting machine

4.The magic soft mud strip cutting machine 

The maximum cutting frequency: 20 times per minute.

Maximum length of mud article: 1254 mm.

Maximum cutting height: 250 mm (specified).