Universal never backward

G series gas ring type fan to the wide pressure dual-band. IP55 protection level (insulation class F) features of motor and through American UL, CE, CCC certification. Which makes it become a global best solution. They without any modification and test can be used in Europe, the americas and Asia, and the products we all have inventory, can meet your needs at any time.

Hearrick the characteristics of the high pressure fan

In general, and hearrick high-pressure blower has the following features:

1, with a double absorption function, one can use suction, dual-use, can also use hair drier; You can also use suction and blowing at the same time, the equivalent of rotary vane vacuum pump as the function;

2, less oil or no oil works, the output of the air is clean;

3, relative to the centrifugal fan and fan for medium voltage, the pressure is much higher, often is the centrifugal fan more than a dozen times.

4, if the pump body is whole die-casting, and using the shockproof foot pedestal installation, then its claim to the install base is very low, not even use the fixed foot can be normal operation, very convenient, also very save installation cost and cycle;

5, relative to other types of air blower, roots blower, for example, the operation of the noise is low, the greater the power, the more obvious, more than 5.5 KW will be displayed;

6, maintenance free use; Its loss is only two bearings, within the warranty period, basically do not need to maintain;

7 and hearrick high-pressure blower mechanical wear very small, because in addition to bearing, no mechanical contact part of the other, so, of course is also very long service life, as long as it is under normal conditions of use, 3 ~ 5 years is no problem.

Product use: suitable for paper cutter, cigarette filter machine, electroplating bath stirring, spray dryer, water treatment aeration, silk screen printing, photographic plate maker, injection molding machine automatic feeding dryers, liquid filling machine, welding equipment, film, paper, shipping, dry cleaning, washing, air cleaning, dry bottles, gas transmission, feeding, collection, etc.

Using information:

And hearrick high-pressure blower must be placed on the above horizontal dry ventilated place.

hearrick high-pressure blower installation considerations

1, must use the flat washer and spring washer to tightening screw;

2, it is best to use rubber cushion to withstand the weight of the high pressure fan, especially high power high pressure fan, essential;

3, the noise has asked for some occasions, also equipped with muffler to reduce noise (in general, about 5 db), silencer installed in the ventilation pipe or out at the end of the wind pipe;

4, requiring high for some to noise, can according to the conditions of the machine itself, plus deadened the noise of a layer of cotton, can satisfy the requirement of the field noise, concrete can be consulting us rick high-pressure blower manufacturer or the noise of the professional management company;

5, in the use of sound deadened the noise of continous, pay attention to the distance of the high pressure fan and casing, pay attention to the high pressure fan ventilation and heat dissipation, pay attention to the rubber cushion to withstand the weight of the high pressure blower, specific need to consult the manufacturer of high pressure fan.

6, hearrick high pressure fan into the outlet pipe connection, the hose should be used, to isolate vibration.

Company website: http://www.hearrick.cn