Products: 
LXC63X0 / LXC51X0 series controller uses 32-bit microprocessor and embedded system control technology, precision measuring 16 parameters, 32 programmable inputs, 35 warning protection parameters, 85 programmable output, a total of 121 can be configured parameters. Of which 108 can be configured from the front panel. With LCD graphic display module can display various engine parameters and generator parameters. Being rapidly expanded use in multiple areas, such as: small power plants, biogas power generation, oil power, field engineering, factory, fire pumps, mobile base stations, and many other fields. Suitable for gasoline, diesel, natural gas, biogas and other power equipment, many well-known domestic and foreign enterprises have been widely supporting applications. Completely replace DSE51X0 / 52X0 series controller.
 
Product performance and features: 
        1, for the stand-alone automated, controlled by the remote power signal generators from the start and stop; 
        2, based on the increase in LXC6310 mains power monitoring and mains / generator automatic switching control function (AMF), especially suitable for stand-alone automated systems. 
        3, using 128x64 dot matrix LCD display. Four languages​​: Simplified Chinese, English, Spanish, Russian showed that 98% of the parameters can be set on the controller; 
        4, all the parameters you can use a PC via USB, RS232, RS485 interface adjustments, using the MODBUS protocol can achieve "three remote" function; (RS485 is optional) 
        5, with SMS function, you can automatically send an alarm message to five phone numbers set an alarm when the generator set can also be used to control the turbine generator set and review the status via SMS. With advanced networking capabilities, via GPRS mobile networks and the Internet interconnection network in any place can RMON; (GPRS modules to be installed: LXI680) 
        6, a variety of sensor data acquisition and display mains / generator phase voltage, phase current, frequency, active power, reactive power, power factor, energy, engine; 
        7, three fixed analog sensors (temperature, oil pressure, level yuan), two programmable analog sensor can be set to the temperature or pressure or liquid level sensor element; 
        8, mains overvoltage, undervoltage, over frequency, under frequency warning function, power generation, overvoltage, undervoltage, over frequency, under frequency, over current, over power, warning and shutdown protection function; 
        9, has a history of failure record 200, and can record oil pressure, water temperature, voltage, current and other important parameters of the fault instant. When multiple warnings, warning bar will display them in turn, facilitate the analysis of the reasons; 
       10, with a real-time clock, timer switch (monthly / weekly / boot once a day and can be set with or without load) function, to achieve automatic maintenance purposes; 
 
Specifications: 
      Operating voltage: DC8.0V to 35.0V continuous power supply 
      Total power consumption: <3W (standby mode: ≤2W) 
      Alternator Voltage Input: 20V AC-360 V AC (ph-N) 3 phase 4 wire 
      Three-phase four-wire 30V AC-600 V AC (ph-ph) 3-phase 3-wire 
      Three-phase three-wire 20V AC-360 V AC (ph-N) 
      Single-phase two-wire 20V AC 620 V AC (ph-h) 
       Two-phase three-wire 
       Alternator Frequency: 50 Hz / 60Hz 
       Speed ​​sensor voltage: 1.0 to 70V (rms) 
       Speed ​​sensor frequency: maximum 10000Hz 
       Start relay output: 16Amp controller supply voltage output 
       Fuel Relay Output: 16Amp controller supply voltage output 
       Programmable relay output 1: 16Amp controller supply voltage output 
       Programmable relay output 2: 16Amp controller supply voltage output 
       Programmable relay output 3: 16Amp controller supply voltage output 
       Programmable relay output 4: 16Amp 250VAC passive output 
       Power switch on the relay programmable relay output 5: 16Amp 250VAC passive output 
       Mains closing relay programmable relay output 6: 16Amp 250VAC passive output 
       Dimensions: 240mm x 172mm x57mm 
       Hole size: 214mm x 160mm 
       Current transformer secondary current: Rated: 5A 
       Working conditions: Temperature: (25 ~ 70) ° C Humidity: (20 ~ 90)% RH 
       Storage conditions: Temperature: (- 40 ~ + 70) ° C 
       Protection class: IP55: when waterproof rubber ring between the controller and the control panel. 
                       IP42: When there is no waterproof rubber ring between the controller and the control panel. 
       Dielectric strength: Object: in the input / output / power between 
                      Reference Standard: IEC688-1992 
                     Test methods: AC1.5Kv / 1min leakage current 3mA 
       Weight: 0.90kg

Dongguan Tuancheng automation equipment Co., Ltd
    Contact person: Zeng Yongquan
   : + 86-769-23162896
   : + 86-769-23166296 (609)
    : www.lixise.com
   ADD: Wentang Road,Chashang industrial zone #18,Dongcheng,Dongguan,Guangdong,China

Write us or call us
 
If you have any technical related questions, requirements or ideas, feel free to contact Technical Support Department. 
 
If you have any business related questions, requirements or ideas, please contact us.
 
If you want to place an order, please contact us at
 
  E-mail: sales@smartgenset.com
 
  E-mail: harry@dgfeirui.com.cn
 
  E-mail: elva@dgfeirui.com.cn
 
  E-mail: jasmine@dgfeirui.com.cn

 
We work Monday to Friday, excluding public holidays.