Products: 
        LXC9220 power plant automation controller for a single diesel generator sets automation and control system that uses 32-bit microprocessors and embedded real-time systems technology, automatic power-generating units / stop, precision measuring a variety of parameters, alarm protection and "three remote "feature. LCD graphics controller uses the big screen (240 * 128LCD) display, can display almost all important parameters in the next page, save the page. At the same time can be displayed in Chinese, English and other languages​​, all parameters can be adjusted from the control panel can also use the PC via USB, RS232, RS485, LINK or GPRS remote adjustment and monitoring. Its compact structure, simple wiring, high reliability, and can be widely used in various types of generators automation systems, but also for the fire pump, air compressor automation control systems. 
         LXC9220: LXC9210 based on the increase in electricity consumption monitoring and mains / generator automatic switching control function (AMF), especially suitable for stand-alone automated systems. 

Product performance and features: 
        1, using 240x128LCD display with backlight, multi-language interface operations include: Chinese, English, Spanish, Russian. Most of the parameters can be displayed on the next page, save frequent switching page views, making the operation more convenient; 
        2, with the SMS function, you can automatically send an alarm message to five phone numbers set an alarm when the generator set can also be used to control the turbine generator set and review the status via SMS. With advanced networking capabilities, via GPRS mobile networks and the Internet interconnection network in any place can remote monitoring; (GPRS modules to be installed: LXI680) 
        3, collect and display mains / generator phase voltage, phase current, phase sequence, frequency, active power, a variety of sensor data, reactive power, power factor, energy, engine; 
        4, mains overvoltage, undervoltage, over frequency, under frequency, phase, reverse phase sequence warning function, power generation, overvoltage, undervoltage, over frequency, under frequency, over current, over power, reverse power, lack of phase, reverse phase sequence warning and shutdown protection function; 
        5, three fixed analog sensors (temperature, oil pressure, level yuan), two programmable analog sensor can be set to the temperature or pressure or level element sensor (LXC71X0 no such function); 
        6, a heater, a cooler, fuel pump control functions; 
        7, perfect control and protection functions: diesel and natural gas generator set automatic start / stop, close / brake (ATS switch) and perfect protection fault display function, when there is more than one warning, warning bar will display them in turn easy to analyze the reasons; 
        8, there are historical failure record 200, can record a variety of important parameters of hydraulic, water temperature, voltage, current, power, etc. In the event of a warning or fault instant, easy to analyze the causes and maintenance; 
        9, there is real-time clock, timer switch (monthly / weekly / boot once a day and can be set with or without load) function; 
        10, with three group maintenance functions can be set to machine maintenance cycle. Maintenance time to the action can be set (warning or alarm stop); 

Specifications: 
Operating Voltage 
DC8.0V continuous power supply to 35.0V 
Total power consumption 
<3W (standby mode: ≤2W) 
Alternator Voltage input: 

Three-phase four-wire 
12V - 360 V AC (ph-N) 
Three-phase three-wire 
20V - 620 V AC (ph-ph) 
Single-phase two-wire 
12V - 360 V AC (ph-N) 
Two-phase three-wire 
12V - 360 V AC (ph-N) 
Alternator frequency 
50 / 60Hz 
Speed ​​sensor voltage Vpp 
2.2 - 100Vpp (peak to peak) 
Speed ​​sensor frequency 
The maximum 10000Hz 
Start relay output 
16Amp controller supply voltage output 
Fuel relay output 
16Amp controller supply voltage output 
Programmable relay output 1 
7Amp controller supply voltage output 
Programmable relay output 2 
7Amp controller supply voltage output 
Programmable relay output 3 
7Amp controller supply voltage output 
Programmable relay output 4 
7Amp 250VAC passive output 
Programmable relay output 5 
7Amp 250VAC passive output (LXC9220) 
Programmable relay output 6 
7Amp 250VAC passive output (LXC9220) 
Dimensions 
254mm x 180 mm x 44 mm 
Hole Size 
218mm x 160mm 
Current transformer secondary current 
Rated 5A 
Working conditions 
Temperature: (- 25 to + 70)

Dongguan Tuancheng automation equipment Co., Ltd
    Contact person: Zeng Yongquan
   : + 86-769-23162896
   : + 86-769-23166296 (609)
    : www.lixise.com
   ADD: Wentang Road,Chashang industrial zone #18,Dongcheng,Dongguan,Guangdong,China

Write us or call us
 
If you have any technical related questions, requirements or ideas, feel free to contact Technical Support Department. 
 
If you have any business related questions, requirements or ideas, please contact us.
 
If you want to place an order, please contact us at
 
  E-mail: sales@smartgenset.com
 
  E-mail: harry@dgfeirui.com.cn
 
  E-mail: elva@dgfeirui.com.cn
 
  E-mail: jasmine@dgfeirui.com.cn

 
We work Monday to Friday, excluding public holidays.