Products: 
        Manual LXC9510 generators parallel controller for more than one of the same capacity or a different capacity generators / automatic parallel system as well as for single generator set constant power output and electricity grid, automatic power-generating units shut down / parallel operation, data measurement, alarm protection and "three remote" feature. The controller uses a large-screen LCD graphic display, can display Chinese, English and other languages​​, simple, reliable operation. GOV and AVR with a control function, can automatically synchronize all kinds of working conditions and load sharing, the controller accurately monitor turbines, generators work when abnormal fault status display automatically while troubleshooting column from the parent, close generators, in LCD. All parameters can be used to adjust the PC via the USB interface, but also the use of a PC via RS485 interface adjustment and monitoring. Its compact structure, simple wiring, high reliability, and can be widely used in various types of generators automated parallel system. 

Product performance and features: 
        1, using 240 * 128LCD display with backlight, Chinese, English and other languages ​​optional interface operation, and can be on-site selection, easy to plant commissioning test machine; 
        2, with CAN BUS interface, you can connect with J1939 EFI machine can not only monitor the common data EFI machines (such as water temperature, oil pressure, speed, fuel consumption, etc.), you can also CANBUS interface control starting, stopping, acceleration and deceleration, etc; 
        3, suitable for three-phase four-wire, three-phase three-wire, single-phase two-wire, two-phase three-wire (120 / 240V) power supply 50 / 60Hz system; 
        4, acquisition and display busbar / generator phase voltage, phase current, frequency, power parameters; 
        5, busbar has a phase, reverse phase sequence detection, power generation has overvoltage, undervoltage, over frequency, under frequency, over current, over power, reverse power, phase, reverse phase sequence detection function; 
        6, the synchronization parameters are: power generation and busbar voltage difference, frequency difference generation and busbars, busbar power and phase angle difference; 
        7, in the automatic mode with multiple operating modes: with no load operation, load operation, according to the needs of parallel operation; 
        8, with a parallel / load transfer function of soft splitting; 
        9, three fixed analog sensors (temperature, oil pressure, level), two programmable analog sensor can be set to the temperature or pressure or liquid level sensor; 
       10, a variety of temperature, pressure, oil level sensor curves can be used directly, and custom sensor curve; 
      11, control and protection functions: automatic diesel generator set start / stop, switching sub-gate and perfect display fault protection and other functions; 
      12, the parameter settings: allows users to change the setting of its parameters, and memory in the internal EEPROM memory when the system is powered down is not lost. Most parameters can be adjusted from the front control panel, all parameters can be used to adjust the PC via the USB interface, but also the use of a PC via RS485 interface adjustments. Using MODBUS protocol can achieve "three remote" function; 
      13, with 200 history, real time clock, timer switch (monthly / weekly / boot once a day and can be set with or without load) function; 
      14, with a total running A, B and cumulative energy A, B, users can clear the re-accumulation, user-friendly self-statistics; 
      15, a heater, a cooler, fuel pump control functions; 
      16, with a maintenance function, the maintenance time to the action can be set (warning, alarm stop or trip down); 
      17, modular design, flame-retardant ABS housing, pl able terminal blocks, embedded installation, compact, easy to install. 

Specifications: 
       Display: LCD (240 × 128) 
       Operation Panel: silicone panel overlay 
       Digital inputs: 8 
       Relay Output: 8 
       Analog inputs: 5 
       AC format: 1P2W / 2P3W / 3P3W / 3P4W 
       Generated voltage detection range: (15 ~ 360V) V (ph-N) 
       Power generation, electricity frequency range: 50 / 60Hz 
       Monitoring Interface: USB / RS232 / RS485 
       Programming Interface: USB / RS232 / RS485 
       Controller Power: (8 ~ 35) VDC 
       Dimensions: 254 × 180 × 44 
       Hole size: 218 × 160 
       Operating temperature: (- 25 ~ + 70) ℃

Dongguan Tuancheng automation equipment Co., Ltd
    Contact person: Zeng Yongquan
   : + 86-769-23162896
   : + 86-769-23166296 (609)
    : www.lixise.com
   ADD: Wentang Road,Chashang industrial zone #18,Dongcheng,Dongguan,Guangdong,China

Write us or call us
 
If you have any technical related questions, requirements or ideas, feel free to contact Technical Support Department. 
 
If you have any business related questions, requirements or ideas, please contact us.
 
If you want to place an order, please contact us at
 
  E-mail: sales@smartgenset.com
 
  E-mail: harry@dgfeirui.com.cn
 
  E-mail: elva@dgfeirui.com.cn
 
  E-mail: jasmine@dgfeirui.com.cn

 
We work Monday to Friday, excluding public holidays.