Products: 
     SX460 generator regulator board is a brushless excitation system generator regulator board, excitation power derived directly from the generator terminals, and the machine does not function, AVR Generator Automatic Voltage Regulator. Detecting power input 120V / 240V. No product can be replaced. No substitute product. 
    SX460 is a half-wave phase-controlled thyristor type Automatic Voltage Regulator (AVR) and forms part of the excitation system for a brushless generator in addition to regulating the generator voltage, AVR circuits including speed and sensing loss protection features. Excitation power is derived directly from the generator terminals. Positive voltage from the residue levels established in order to ensure efficient use of semiconductor voltage power circuit. AVR with the main exciter field winding and a stator winding for a closed-loop control of the output voltage and load regulation + / - 1.0%. 
      Apart from the main stator, AVR also derives a sample of the output voltage from the voltage winding of the object of control. In response to this sample voltage, AVR controls the power fed to the exciter field, so the main field, keeping machine output voltage specified limits, compensating for load, speed, temperature and power factor of the generator. 

Product performance and features: 
     1, voltage accuracy <± 1% 
     2, in order to select the single-phase copper jumper 120 / 240VAC detection voltage 
     3 to choose 50/60 Hz jumper copper 
     4, with the loss of the detected voltage protection circuit 
     5, with the low-frequency protection (UFRO) and the voltage slowly build function 
     6, with LED status indicator frequency is too low 
     7, can be copper jumper settings to suit different power generators 
     8, prominent features: a stable exchange circuit provides an adjustable negative feedback inhibition components including the prevention of sub-cycle peak voltage damage AVR components and reduce the amount of noise in the generator terminals. 
     9, a selling point: a low-pass filter to prevent the distortion of the waveform affect the operation of the AVR. 

The definition of the different colors: 
     1, these three kinds of colors mean: red Stanford's early products, the use of capacitors to WIMA, the quality is very good. Blue said late product, capacitor EPCOS, quality is also good. Gray is only the last 2 years, the capacitance of AV, and the packaging is different. 
     2, due to different capacity, the price is different 
     3, although prices vary, but the quality is similar. Just some maintenance staff always feel better in red, with red is also the most expensive. 

Specifications: 
      Input 
      Voltage: jumper select 95 - 132 v AC or 190 - 264 v AC 
      Frequency: 50 - 60 Hz nominal 
      Stage: 1 

      Output 
      Voltage: Max 90 v dc 207 v AC input 
      Current: 4 A continuous DC intermittent 10 seconds 
      Resistance: 15 ohms minimum 
      Regulation: + / - 1.0% 
      Thermal drift: 0.05% per degree. C change in AVR ambient (Note 2) 
      A typical system response: 
                 AVR response: 20 ms 
                 Proposed current 90%: 80 ms 
                 Machine-volt to 97%: 300 ms 
      External voltage adjustment: + / - 10% and 1 k ohm 1 watt trimming 
      In the frequency protection: 
               Set point: 95% Hz 
               Waveform: 170% to 30 Hz 
       Unit Power: 10 watts maximum 
       Establish Voltage: 4 V @ AVR terminals 

       Environment 
       Vibration: 20 - 100 Hz 50 mm / sec. 
                     100 Hz - 2 kHz 3.3 g 
      Operating temperature: -40 + 70 ° C 
      Relative humidity: 0 - 70 ° C 95% 
      Storage temperature: -55 + 80 ° C

Dongguan Tuancheng automation equipment Co., Ltd
    Contact person: Zeng Yongquan
   : + 86-769-23162896
   : + 86-769-23166296 (609)
    : www.lixise.com
   ADD: Wentang Road,Chashang industrial zone #18,Dongcheng,Dongguan,Guangdong,China

Write us or call us
 
If you have any technical related questions, requirements or ideas, feel free to contact Technical Support Department. 
 
If you have any business related questions, requirements or ideas, please contact us.
 
If you want to place an order, please contact us at
 
  E-mail: sales@smartgenset.com
 
  E-mail: harry@dgfeirui.com.cn
 
  E-mail: elva@dgfeirui.com.cn
 
  E-mail: jasmine@dgfeirui.com.cn

 
We work Monday to Friday, excluding public holidays.