This product is a great product for daily use,Support solar power ,with portable handle and with portable stand.

   * Powered by56 pcs of ultrabright multiplechip led which acts as led light.

   *Increased discharge time due to dual funcion

   * Burns 100 times longer than normal torches.

   * Strong ABS body Water resistant and shock proof

   *10000+ hours of led life

   *More energy efficient and practical than using of  Alkaline batteries.

   *More environmen friendly.(no need to replace led again)

   *300+ hours of pleasant ligh.

   *With rechargeable function

PACKAGE INCLUDES:

• 1 x portable rope

• 1 x Emergency LED light

•  1 x Retail box

DIRECTION FOR USE:

•   To turn "on" the Emergency LED light push the "ON/OFF" button towards "LOW” or "HIGH” direction 

•  To turn "ON" 56 SMD on LOW ligth push the "on/off" button downwards.To turn "ON"56 SMD on HIGH Light push the "ON/OFF" button upwards.To turn "off" the Emergency LED Light push the "ON/OFF" button incenter position.
• Emergency LED light is equipped with Automatic Light UP Function or Emergency Function During Power Failure. When the Emergency LED light is turned ON using the DC power and the charging wire is pl ed in the AC power socket with the main power is turned OFF, the Emergency LED light will not light up but instead charge the battery inside the unit and if the main power is turned OFF, the Emergency Led Light with light up, this is called the Automtic ligtht up function
• To charge the Emergency Led light unwind the 220V round pin wire given along, plug on end of the wire in the battery charging jack on the unit and then plug the other end of the wire in any standard 220V AC power socket, turn "on” the power it will charge the Emergency LED light
• To charge the Emergency LED Light using the solar panel, plug one end of the wire in the DC-4V socket on the unit and then keep the solar panel under the sun for charging the Emergency LED Light.
• There is a small RED indicator near  by the  ON/OFF button indicating the status of the charge.Once fully charged ,unplug the wire from both socket and led light and keep it safe.
• Avoid looking directly into the LED'S as it has a strong beam.