CR-uEC SDI 100T receives the SDI video signal output by the PC video player, codes and compresses it, and then transmits the video signal via traditional CAT5 cable to the remote ANY series receiver or to ANY series modular matrix for switching.

CR-uEC SDI 100R receives the data sent by ANY series transmitter, or the data sent by IP output card of ANY series modular matrix. It extracts the reduced into SDI video, audio signal, and ultimately send to terminal display equipment.

Features

● Support video resolution ranging from 800*600 to 1920*1080 , support Vesa.

● Adopting special format to decompress the video compression and reduce the transmission bandwidth, thus to guarantee the video fluency, good image quality and short time delay.

● The standard cable transmission mode, far transmission distance, strong anti-interference ability.

● Support RS-232 transmission.

● The transmitter is of high integration, small in size, be in good compatibility with other video output display device, plug and play, easy and convenient.