~BAD98
Explosion-proof, Corrosion-proof Lamp
Hazardous area: Zone1,2,20,21,22
Group of gas or vapour:IIA, IIB, IIC
Temperature class: T1-T6
Application: Indoor, outdoor
Enclosure: Die-casted with aluminum alloy without copper, shot blasting cleaning, electrostatic polyester-sprayed
Exposed fastener: High quality stainless steel
Display: Impact-resistant and hermally stable toughened glass
Component: Overlong service life: average service 60 thousands to 80 thousands hours; High power factor >0.99, high efficiency and energy-saving; Instantaneous start, no flash.
Component: Junction surface adopts thread flame proof and cylindrical flame proof structure, silicone rubber gaskets structure design with strong protection. Optimized overhauling operation design has set operation handle for opening conveniently; Light source compartment and electrical compartment have reliable thermal isolating compartment to ensure luminaries can operate for a long time.
Structure description: Junction surface adopts thread flame proof and cylindrical flame proof structure, silicone rubber gaskets structure design with strong protection.
Installation: Ceiling mounting(x), pole mounting(g), wall mounting(b), fence mounting(h.a1), flange mounting(f.a2)
Implementation of standards: GB3836.1、GB3836.2、GB3836.3、GB12476.1; IEC60079-0、IEC60079-1、IEC60079-7、IEC60079-1-1
Ex-marking: Exd II CT4 Gb/DIP A20 TA, T6
Degree of protection: IP65
Rated voltage: AC220V/50Hz
Light source power: 40W, 50W; 80W;120W,150W
Corrosion-proof: WF1*WF2
Thread of inlet: G3/4”
Cable diameter: Φ10mm-Φ14mm
Light source: Electrode less induction lamp(ED)