TL-TG50 Bass pump ,Bass shaker ,Buttkicker ,Bass vibration speaker Tactile Transducer
For bass vibration of car audio, home theater system and game chair.
~External magnetic         
Electric coil         
Power:50(W)        
Frequency response:30-400(kHz)Usable frequency (depending on substrate): 20-200 Hz        
Impedance 4 (Ω)        
Sensitivity :78dB/W        
Frequency characteristics:low-frequency        
Inner box: 180*180*80MM/1PCS        
Dimensions: 138x138x56mm         
Net Weight:1.5kg ± 5%        
RATED Power Input: 35 WATTS AT11.8Vrms / 48hrs (pink noise)         
MAX Power Input : 50 WATTS  AT14Vrms/ 24hrs, (pink noise)         
Want to feel your music? The Bass Shaker products allow you to experience every thump, thrust and shake...the way         
bass sound was originally intended. Aura's patented technology preserves the sound pressure levels so there's no         
distortion while enhancing the bass energy delivered from your stereo. We're taking surround sound to another level.....        
Here's how you add bass shakers to your home theater system:        
1) Find the variable low-level RCA output for the subwoofer (LFE) channel on the rear panel of your AV receiver and        
 disconnect the cable going to your powered subwoofer.        
2) Connect a RCA Y-cable to the subwoofer output on your receiver.        
3) Connect the cable from your subwoofer to one end of the Y-cable.        
4) Connect a cable to the remaining unused end of the Y-cable to an input on the amplifier being used to power the shakers.        
5) Connect the shakers to the output of the amplifer.        
6) Set the relative level of the shakers by adjusting the volume control on the amplifier driving them.