Autoclave / retort sterilization machine mechanical principle

1. Steel thermal transfer conductivity : 54 Kcl/(hr)(m2)(℃)
2. Steam to saturate water thermal transfer conductivity : 5,000 ~ 10,000 Kcl/(hr)(m2)(℃)
3. Heat exchanger was heat conductivity transfer system, water steam spray retort system was direct thermal transfer system
4. Thermal transfer area : Small drop would expand the thermal transfer area to very large into the retort sterilizer
5. A few circulation liquid could be doing the thermal translation function
6. Close equilibrium cycle system for cooling process, its save for food and pharmacy sterilizing process

Warning: Autoclave utility system

1. Water supply for autoclave / retort sterilizer
   1. The source should be clean or soft water, the supply could be from steam boiler water treatment machine, or independent treatment equipment.
   2. Boiled the city water ( hard ), will separate out the calcium carbonate, the calcium carbonate was a small particle; Its would adhere to the package container surface, its was bad products
   3. The calcium carbonate will adhere to the shell and pipe inner face too, its would damage the equipment, and looking was dirty
   4. Usually sterilize machine breakdown was caused by the calcium carbonate
   5. Cleaning the calcium carbonate was hard working, not so easy
2. Electrical power supply for autoclave / retort machine
   1. Electrical power supply should be stable, the differential of voltage should be under 10%, otherwise the driver motor, PLC, relay, micro computer, etc etc would be breakdown or be burnout.
   2. All the electric wire connector should be waterproof
3. Steam supply to retort / autoclave sterilization machine
   1. The main pipe of steam should keep the pressure above 6 kg/cm2 (85 psi)
4. Pressure air supply to sterilization machine / autoclave / retort
   1. Must have a service tank to storage the pressure air, always keep the air pressure above 5 kg/cm2 (70 psi)
   2. If insufficient air supply, the pouches package would broken, the machine would unstable

 note: we can design and manufacture any type of autoclave accroding to customers' requirements,

pls feel free to contact us if have some interesting products, best wishes!