Finseen IP alarm system via a mobile app available for Android and IOS. With it, the user can learn about the current state of the system from the installed in the house. In the event of a panic alarm , the application will immediately notify the user. 

Feature:
1. Broken connections are monitored 24/7 by the IP Cloud. If the connection is interrupted the user 
gets notified.
2.By multi users of the same alarm system it is important that all users are update with the same 
information.
3. Operate Alarm panel Away Arm,Home Arm, Disarm, Emergery Alarm through Internet.
4.Support setting alarm zone with intellegent door sensor function: triggerred by open or close 
door, and upload Status of Alarm zone.
5. Upload Low voltage of Detector, Alarm Zone, Tamper-Proof triggered.
6.Can be set with 99 wireless zone, and each zone can learn 1pc of accessories.
7.  The IP Alarm shows the status of the system with the health indicator.
8.  Event logs are controlled by the cloud and always correct updated.
9.  There is no subscription,contract no sim card.Some features e.g. response security service is subject to payment.

Alarm Zone:
There is 100 alarm wireless zone in total for alarm panel.
00   : Wireless Remote control (10pcs in total)
01-19 : 24hours zone (19 wireless zone in total)
20-59 : Perimeter zone (40 wireless zone in total)
60-99 : Motion zone  (40 wireless zone in total)

Specification:
Power supply: 5V/1000MA
Battery: lithium battery 800MA/H
Standby Current: 220MA
Alarm Current: 310MA
Receiving Frequency: 868.35MHz
Emitting frequency: 868.35MHz
Receiving and emitting distance: More than 100metres under open area
APP:Andriod ,IOS
Battery backup:YES
Certificate:CE

Alarm:
When active alarm by Remote control or wireless detector trigger, if alarm delay is 0second,then alarm delay is more than 0second, and alarm panel will go into alarm delay status, and the buzzer will sound “di” one time each second.
When alarm delay finished, it will go into alarm status, and blue light will flash quickly.
And alarm time is 2seconds.
And the alarm panel can be active emergency alarm through Internet.

Standard Alarm Kits:
1)Alarm host*1(multi languages setting on APP)
2)Wireless Door/Windows Sensor*1
3)PIR Detector*1
4)Remote Control*1

•What happens if the power is interrupted ?
User will receive a message, if the connection to user''s alarm is interrupted. (because user internet router is turned off).
Alarm host has a backup battery that lasts for approximately 4 hours off line operation.
Alarm is fully functioning even though the power is disconnected. The siren will go off and the alarm host will make sound in case of attempted burglary. At the same time user will receive a message, that the connection is lost.