A31 burglar alarm manual

Description:

A31 mobile phone anti-theft alarm system, is the latest product, saving the cost of our customers, saving labor costs but also to bring customers a more perfect shopping experience for products: cell phones, MP4, navigator.

Product parameters:

Name: A31 phone anti-theft alarm

Model: A31 Weight: 0.23kg

Color: Silver Material: Aluminum fireproof ABS material

Alarm volume: 100 db unlock method: infrared remote control

Charging voltage: DC 5V

Standby time: 180 days

Features:

1. Product is a series of drag, a mobile phone can be used alone to show and theft.

2. One three-digit password using encryption security, professional remote control to unlock, security more secure!

3. Built-polymer battery, theft can be unpl ed, power worry - free!

Installation

1 adhesive protective film to the bottom of the A31 alarm tear, stick to a clean, flat on the table, make sure the host at the bottom of the button has been pressed.

2 Plug the power cord into the front jack alarm red light at this time in charge has been proved that the alarm automatically shut down after the full.

3 Fortunately, the theft charge cord hosts and mobile phone charging interface, and plug socket crystal spring line.

4 spring crystal protective film adhesive tear lines, such as a mobile phone or tablet to stick to the back or front of digital products, ensure sticky head button is pressed, then will hear the "tick" sound, indicating that the alarm has been work.

5 default password is 345, if reported remote control at the alarm button continuously pressed 345 to release the alarm sound

Use the remote control

1 Change Password: alarm from the right side of the phone line jack unplug the sensor spring line this time the alarm will alert the police and then released by password length is set by the remote control button to hear the correct password is entered when the old password after the beep alarm long rang two seconds and then enter the three-digit new password at this time the alarm rang two seconds long, enter a new password to modify the sound to complete the alarm rang three new password to use (note again: 3-digit password is entered the new password twice If you enter must be the same interval over 15 seconds the alarm will beep indicates change the password timeout)

2 Forget Password: the packed alarm removed from the desktop with paper clip into the back of the alarm by clicking the small hole at this time the yellow light blinks three times the alarm state to restore the factory default password is the state 345