3W LED bulb lamp candle lamp power supply YL-G301TA

Product Name:3W LED bulb lamp candle lamp power supply YL-G301TA
Product type:YL-G301TA      Output power:3W
Input voltage:100-265V      Output voltage:9-11V    
Output current:300mA        Efficiency:76%           
Power factor:0.5           Dimensions:22x16.5 x16
Protection characteristics
Output overload/output over voltage/short/over temperature
Service life:≥30000h

Product Features
Universal AC input 100-265V AC range
Protection:short circuit/load/overload / over voltage
Scope of bulb lamp,lamp,ceramic lamp
Emerald 5000 hours electrolysis
Gao Heng liu precision high price
100% full load burn-in test

Note
1.All parameters NOT specially mentioned are measured at 230VAC input,rated and 25℃ of ambient temperature.
2.The Accuracy is the total Accuracy which Comprises the Line Regulation,Load Regulation and Error.
3.Constant Current Mode Can Apply Only to the LED and relevant industry.
4.Ripple & Noise are measured at 20MHz of bandwidth by using a 300mm twisted pair-wire terminated with a 0.1uf & 47 uf parallel capacitor

Instructions for use
This product at both ends, one end is the input end of the AC,wherein one end is the input"N"end;the other end is type"L"to the end.The other end of the DC output,DC output is negative,then "LED-";the other end is connected with the DC output positive,"LED+".
★ ★note 1:In the device of power,please note that theinput and the output ends of the correct connection; 
★ ★note 2:to avoid LED burnt out,please connect the DC output drive power;
★ ★note 3:when using this product please note the high security,and good anti shockmeasures.

Order hot line: 4007-168-665
(this article by Yili photoelectricLED waterproof power consolidation share)Yili recommended:LED driver