Automatic Film Applicator

 

                                    Introduction

 

1.0 Introduction

 

In order to obtain reproducible results from physical, appearance and chemical performance

testing of surface coatings, it is essential to prepare uniform films of controlled thicknesses.

This can be difficult to achieve with hand application methods which often result in variations

between operators, and for this reason automatic application methods are recommended.

 

Our automatic instruments have been designed to produce consistent results when used with

a wide range of different applicators e.g. Block Spreaders, Wire Wound Bars, Bird Type

Applicators, Sag Index Applicators, Sagging and Levelling Testers and many others in order

to provide the benefits of reproducibility and control of application.

 

These instruments have a unique drive system that has been designed to run smoothly with

all types of coating material at all film thicknesses to eliminate the “banding“ that can occur

with thin film coatings such as inks and transparent coatings such as woodstains or automotive clearcoats.

 

 

 

2.0 Standard

 

ASTM D823

 

 

3.0 Features

 

Big LED design,touch-screen operation

 

Testing panel size:A4,A3,User Defined

 

Easy menu guided operation

 

Memory and data output capability

 

Input paint type,viscosity,applicator type to analyze

 

 

 

4.0 Specification

 

Max. Stroke Length: 360MM

 

Speed: 10-200mm/sec

 

Speed control precision: 1mm/s increments

 

High precision glass bed