Parameter

Voltage: input 110V-220V   output: 12V 3A         Nozzle Caliber:0.4mm

 

Target customer: paint worker, products designer, kids, students, thoese who interested in 3D print etc

 

3D printer pen is the latest new powerful tool for designer or students. Our 3D printer pen with lighter, slimer and easier design will become your new loved 3D pen.

 Advantages:

1.       Lighter. The same kind of 3D printer pen on markets have a common fault that not light enough the user easily get tired after using the pen for a long time..

2.       Slimer. The existed 3D printer pens on market are huge and heavy not good for use, especially for those children user as they have small hands. Our design take the best consideration about the needs of children, students and adults and we make the pen slimer.

3.       Easier speed control. As to a 3D printer pen, the speed should be controlable to be faster or slower when use . The exsited 3D printer pens on market some have no speed controller or have a controller that can’t use. Some pens has the controller but need two hands to operate.After long reaserch we make our pen speed can be controlled by hand movement, the user can control easily and freely when creat 3D painting.

4.       Plug design for heater and nozzle. During the R&D period,we bought the exsited 3D pens on the market, we found they are unsuccessful design strickly speaking either shape or function. The worse thing is the poor design creats trouble to user on usage or mainteance, the worst is the unreasonable inner design leads the user can’t put it back after open it. One accessary damage will cause whole pen lose. We made a more advantage design according above fault design. The heater and nozzle 2-in-1 plug design, the user can uninstall the fault heater and nozzle easily without send back to dealer or factory. This can save the cost of after service.

5.       Controllable tempreature design. After analysing the exsited pens on maret, we found they are fixed tempreature design, this will leads trouble to the user who tried to use differnet melting point materials. We created tempreature control function the our pen and the user can adjust the  proper tempreature according different materials.

6.       Intelligent standby function. During the user pause time or forgot switch off the power, the pen will switch to standby model automatically after 5 minitues and the heater will stop working. The heater will back to work when the user start it again. This can reduce the potential accident which caused by forgoting switch off the power.

   

Warning!!!

1.This device is suitable for children over 8 years old and adult use. Children should use it under the tutelage of adult.

 

2.The painting pen nib and the near area are dangerours high temperature area, the highest temperature can reach 230℃,do not touch the nib with hands or touch others objects with the nib.

 3.Do not block the wire loading hole with foreign body.

 4.Do not use non-official power adaptor from other company.

 5.Do not use non-official consumable material from other company.

 6.This device is precision electronic instrument, no water sprinkling.

 7.Keep at safty place after using to prevent from high falling or children touching.

 

 

Specification:

 

 

Output material type:fused deposition modeling

Molding method:3D modeling

Printing area:unlimited

Sprinkle speed:adjustable

Heating tempreature:60℃-230℃ adjustable

Power input:12V 3A

Nozzle diameter:0.4mm

Pen Structure

Operation Guide:

1.Put the power adapter AC plug into the outlet and insert the DC plug into the "power input" hole,the yellow LED turn on and the pen is started and standby.

 

2. Press the "wire feeding" button, the red led turn on and the pen is under preheating.After 0.5-2minutes later,the red led turn to blue, preheating finished the pen is ready to use.

 

3.Insert the consumptable material into the "wire loading hole" which is at the end of the pen.

another hand keep on pressing the "wire feeding" button, the material will be loaded by built-in motor.Wait there is plastic liquid come out from the nib nozzel ,the material loading is succeed.

 

4.Painting.(The speed controller can adjust the spray amount according the moving speed, no need to use both hands )

 

5.Do not touching the nozzle and heating parts during the drawing for your fasty.

 

6.The device will swith to standby model if stop using over 5 minutes. The "working LED" will turn off, when use again, need press the"wire feeding" button to restart.

 

7.When need to unloading or change the material, please repeat the step 2 and keep on pressing on "wire unloading"button.

 

Notice: Heating time affected by the setting tempreature and environmental tempreature.

        Must cut the material ending to smooth before loading the material

        unloading the material after each use is highly recommended.

 

Simple fault remove chart:

If you meet follw fault,please reference the chart.

Fault appearance	Fault reason	Fault resolvent
Power led not turn on	Power adapter or plug problem	Repair or change power adpater
	Mainboard problem	Repair or change the main board
	Outlet problem
The nozzle not sprinkle material	Nozzle blocked	Change the heating nozzle
	Tempreature not high enough	Change the heating nozzle or adjust tempreature
	No heating	Change the heating nozzle or check the mainboard
	The gear bite the material wire	Unloading, clear the gear and cut the damaged material wire
	Material reloading failure	Unloading and cut the wire end and load again
	Mainboard problem	Repair or change the main board
Not heating	The heater damaged	Change the heating nozzle