Wireless HDMI extender 30m 1080P HDMI1.3V

Model:	YT-W200
Brand:	YT
Origin:	Made In China
Category:	Electronics & Electricity / Telecommunication & Broadcasting / Wireless Equipment
Label:	wireless hdmi , wireless extender , hdmi extender 30m
Price:	US $248 / pc
Min. Order:	50 pc

Inquire Now

Product Description

Introduction

Overview

Product YT-W200 includes two parts: YT-W200T and YT-W200R, this sets can transmit uncompressed 1080P/60Hz video contents wirelessly, user could operate it easily, connect YT-W200T to your multiple High-Definition devices such as Cable/ Satellite Box, HD Set-Top Box, Blue-Ray DVD Player, Game Console, and Media Center PC hidden in your cabinet behind your seating area, the other side, connect YT-W200R to your HDTV set by HDMI cable, Any display like LCD, PDP or computer monitor with HDMI input interface. It solves the cluttered cables connection problem and let your room clean.

Main features.

-Working frequency range: 4.9GHz~ 5.9 GHz ;

-With DFS function;

-Smart outfit and portable;

-Build in Omni-directional antennas;

-Over 30 meters whole-house ange with no latency;

-Remote control easily.

4. Product Specification


Product Name	YT-W200T	YT-W200R
Supported Video Resolution	1080p, 720p, 1080i, 576i, 576p, 480p, 480i
HDMI Interface	Supports HDMI 1.3 Video Audio format and HDCP 2.0 with video encryption.
Transmission Distance	Whole home range and penetrates through 2~3 concrete walls: 30meters.
System Latency	<1 ms
Antenna	Omni-directional internal antennas.
Operating Frequencies	4.9~ 5.9GHz (with DFS function).
Power Supply	100~ 240V AC in, 5V 3A DC out Power Adaptor
Regulations	FCC, CE
Certification	802.11a/n
Supporting link speeds	2.5mm Phone Jack, External IR remote controller		Build-in Infrared Remote-control Receiver Module
IR function	153(L)101(W)24mm(H)
Working temperature	0 °C -70 °C
Dimensions	146(L)93(W)25mm(H)

Basic Troubleshooting

Before proceeding to the common troubleshooting procedures below make

sure that Tx,Rx,source and display are powered and connected.

No Video

Check the status of the Link LEDs

LEDs off

Make sure the power is connected

T x Video LED

off

Make sure the source is on, connected to the HDMI port and out putting a legal resolution.

Connecting an invalid video to the HDMI port should turn the Green LED off.

R x Video LED on,but no image

on screen

Make sure the display is connected on and set on the right

channel/source(eg. HDMI channel),and make sure the HDMI wire is connected is well.

T x /Rx Link LED off

Make sure the Tx and Rx are placed in the effective

distance.

Bad Picture

Make sure the HDMI cables used are intact and that you

get a good picture by connecting the source directly to

the display by an HDMI cable.

Make sure nothing is touching or blocking the antennas

Try restarting the link.

Bad Audio/No

Audio

Make sure that the source is outputting legal audio formats

If there are mutes during the link, try restarting the link Make sure there is no 5.8GHz wireless phone within less than 50 cm form the Rx.Some of the phonees on the market use sub-standard transmission schemes.

Other Issues/

Unresolved

Issues

If any other issue occurs of if the above issues persist,try powering off both Rx and Tx and repeating the link set-up process.