Amroll  Drum  Motor  Benefits

Quick and easy to install
Amroll drum motors are much quicker and easier to install than conventional drive systems,
requiring less than one-third of the time needed to fit a multicomponent drive.
Increase operator safety
As a self-contained component without external moving parts and with fixed external shafts, an
Amroll drum motor is probably the safest drive unit available for material handling equipment
and present safety hazards are eliminated.
Space-saving
Because the motor, gearbox and bearings are mounted within the drum shell, the drum motor
takes up much less space and allows higher density and multiple applications.
Lower energy and operating costs
Amroll drum motors operate at 97% mechanical efficient resulting in lower operating cost and
higher output compared to conventional drives. The higher efficiency of the internal drive can
result in energy savings up to 30% over conventional drive systems.
Reduce noise levels
Our gears are manufactured using high quality alloy steel, machined and honed, reducing noise
to minimal decibel levels which exceeds OSHA requirements for noise.
High pressure wash down
Amroll drum motors can operate in harmful environmental conditions, such as water, dust, grit,
chemicals, grease, oil and even during extreme pressure wash-down procedures.
Maintenance free design
The drum motor doesn’t have the external moving components, ensures that the internal parts
are unaffected by external conditions and maintains trouble free conveying for all kinds of
applications. Our motors are virtually maintenance free, requiring only an oil change after
50,000 hours of operation
The  Standard  Amroll  Drum  Motor  Features
- Machined mild steel crowned shell
- Die cast aluminium endhousing
- Mild steel shaft
- Gears machined and honed from alloyed casehardened steel to a high quality finish ensuring
low noise level and longevity
- Supplied with a variety of international voltages, frequencies and phase.
- AC electrical motor according to IEC norm.
- Standard insulation class F according to IEC 34(VDE0530)
- Integrated thermal control
- Factory oil filled, run and tested
- Totally sealed to minimum IP 66/67
- Most of drum motors are CE marked
- All kind of drum motors can be supplied upon customer’s requests
AMROLL  DRUM  MOTOR - - - --  TM80A
TM80A drum motor is mainly designed for limited space applications. It is perfect for high
efficiency and reliable quality. This kind of drum motor is typically used in:
Mini X-ray machines
Package machines
Dynamic weighing equipment
Pharmaceutical handling
Food processing
Belt conveyors
All  TM80A  drum  motors  have  the  following  characters ：
Drum  motor  shell
Mild steel crowned shell treated with anti-rust oil
Food grade drum motor shell can be supplied in Stainless steel-304
Gear  transmission
Gears machined and honed to AGMA/DIN 6 standards to ensure low noise
Die cast aluminium gearbox
Motor
Common global voltages at 50 Hz or 60 Hz
Motor windings insulation class F
All motors with thermal protection
Oil cooled electrical motor
Cable length minimum 1.2 meters outside shaft
Sealing  system
Double shaft sealing system
Sealing system-degree of protection IP 66/67
Oil
Pre lubricated with oil
Oil change recommended every 50,000 hours of operation
Other  items
To be used in the horizontal position only
Belt speed and face width (L) on request
Non-standard drum motors are available on request.
Conformity with CE directive 2006/95/EC