Product Description

Silicon Carbide rod SiC heating element is made from high-density, high-purity silicon carbide, which is the most popular type of economical heating element capable of operating under hot and rigorous environments.

Silicon Carbide rod features:
1. Withstands as high as 1600° C (surface temperature),
2. Generates high heat output per unit surface area, approximately 5-10 times than the output of Nichrome wire,
3. High strength and excellent shock resistance,
4. Heat source is free of noise and air pollution.

SW Silicon Carbides are used in applications ranging in temperature from 600°C up to 1500°C in both air and controlled atmospheres. Although the type of atmosphere used will determine the maximum recommended element temperature. This kind of silicon carbide elements can be mounted either vertically or horizontally. The elements of our product are available in the range of 10 to 54mm diameter. The total length can vary up to 4500mm.

U shape Silicon Carbide is consists of two silicon carbide rod with same diameter. Each rod has both hot zone and cold end with identical resistance. Two rods are connected by the low resistance SiC. Also the connector could be used as holder according to different requirements.

3-phase elements are available in 2 different types: SGC (Dumbbell), SGD(Standard).

These elements are self-bonded silicon carbide formed by re-crystallization of silicon carbide at high temperature. It consists of three high-purity silicon carbide rods connected at one end by a silicon carbide crossbar. The joints, also formed from silicon carbide, fully bond the components into a structurally homogeneous body.

Tips:

Customized production is available, for more information, please do not hesitate to tell me.

For any further question, pls feel free to tell us, and we are very glad to be at your service!
 

We sincerely look forward to cooperating with you !

 May

 JinYu Thermoelectric Material CO.,LTD

 Email:jinyuelectric@163.com