Offering high lumen output, perfect for sign boxes up to 250mm deep, the Illumex Signbox is the obvious choice
for general signage illumination. Our patented multi-optic lens ensures a flat, even distribution of light across
the surface of the sign.
The shell is an 'ULTRA THIN' injection design, with a very modern feel. Adopting very high brightness SMD5050 chips
in a 150degree lense as light source, each module has an output of 0.72w. Perfect for signs, backlighting, lightboxes
and channel letter,etc.They come with VHB tape applied to the backs for easy installation and are IP65 rated so perfect
for interior and exterior use.
This module adopts 'aluminum plate technology', making sure the LED Modules have good heat dissipation, high stability
& low light decay.
These modules require a 12v DC LED Driver to operate correctly ,Run 65 modules on a 60w transformer
SPECIFICATION
Voltage: 12v
Power: 0.72w
Lumen per module: 66lm
Colour Wavelength: 463-475nm
Beam angle: 150˚
Modules per metre: 6pcs
Distance between the module: 80mm
Dimension (mm): 46L*16W*5.8Hmm
LED Type: SMD5050
Casing: Injection moulded
IP Rating: IP65
Warranty: 4 years
Weight(single module) : 9±0.5g
· Perfect for:
· - Halo and Face illumination on Large Built Up Letters/Shapes
· - Shallow Lightboxes
· - Unionshine Led Modules are usable for:
· » Backlighting
· » Light commercial lighting
· » Exhibition Stands
· » Vehicle Lighting
» Atmosphere lighting