GPI- Polyester Putty(with yellow hardener)

Characteristic: A grey-color, two component body filler with good properties in scraping, easy for sanding, adhesion and flexibility, which can be used in filling uneven metal surface in the auto repair.

APPLICABLE SUBSTRATES:

Dried and well-sanded metal steel or Epoxy Primer, Surfacer

PRETREATMENT:

Remove oil stain or wax with degreaser GPI-287/DL-287/Q-287before sanding.

MIXING RATIO:

and

DRYING TIME

Putty: Hardener=100: 1.5-3 (by weight)

Temperature

Product Code

Minutes (25°C)

Pot life

Minutes (25°C) Dry-to-Sand

Lower 5°C

AA(Ultra Fast Drying)

1-2

3-6

5°C---15°C

A2(Extra Fast)

2-4

6-12

15°C---25°C

A (Fast Drying)

4-6

10-18

25°C---30°C

B (Standard)

7-9

14-27

Above 30°C

C (Slow Drying)

10-13

20-36

SCRAPING TOOLS:

Putty knife, soft rubber or plastic coating blade

SANDING TOOLS:

Wet sanding: first sanding by Grit P80-P240, second sanding by P320-P400.

UNAPPLICABLE

SUBSTRATES:

Thermoplastic paint, plastic primer, etch primer and alloy

SHELF LIFE:

6 months in original seal

PACKAGE:

3.5Kgs X 4tins/Ctn; 4Kgs X 4tins/Ctn

PRECAUTIONS:

1.  
2. tools should be washed with lacquer thinner (banana oil) in time after use.
3. keep away from ignition source, direct sunray and rain.
4. putty and hardener should be mixed in right ratio and enough time before putty scraped.
5.  
6.  
7. ed surface.
8.  

The above product is designed for professional use only, please reference to the label and Material Safety Data Sheet (MSDS) for further information, the product users should comply with related health and safe treatment regulations.