Honghai YCB Stainless Steel Pumpadopts the most advanced continuous one-point contact gear.

Double arc contact, together with sinusoidal curve, compose tooth form.

Brief introduction :YCB Stainless Steel Pump is mainly used for transferring lubricating oil in the lubrication system of the mechanical equipment, whose transferring viscosity is 5×10-6～1.5×10-3m2/s（5-1500cSt）, temperature below 200℃.

This Stainless Steel Pump is able to transfer those like oil, beverage and noncorrosive liquid without lubricity. With copper gear, it can be used to transfer those liquid like gas and benzene. 

This series Stainless Steel Pump is equipped with normal motor, which can be replaced with fire proof motor according to customers’ requirement. 

Application scope :1. YCB Stainless Steel Pump can be used as transfer pump and blower pump in oil transfer system;

2. YCB Stainless Steel Pump can be used as transfer pump, fuel pump and blower pump in the fuel system;

3. YCB Stainless Steel Pump can be used as hydraulic pump, providing hydraulic power in hydraulic power transmission system. It can be give performance as transfer pump or booster pump in oil delivery system.

Feature: YCB series stainless steel  pump are mainly composed of gear, axles, pump body, pump cover, safety valve, axle-end seal etc. The gears are adopted double circular teeth shape, which makes the gears less wear on gear surface, stable revolution, low noise, long service life and high efficiency, due to no sliding on the teeth during gear falling-in. This kind of pump has got rid of traditional design and come into a new decade in designing and application.

The stainless steel  pumpis designed with safety valve for protection against overload. The full return flow pressure of the safety valve is 1.5 times higher than the rated exhaust pressure of the pump. It can be also adjusted within the allowance of exhaust pressure range according to circumstances. But please note the safety valve can’t be applied as pressure reducing valve for long time. You may install pressure reducing valve on pipe-line if needed.

There are two kinds of axle-end seals, mechanical seal and packing seal, which can be chosen according to the clients’ requirement in different application circumstances.

The direction of rotation is clockwise viewed from coupling end.