F50-80V water flow generator
F50-80V: DC 0-80V output ,with no regulator circuit, the peak voltage reaches 80V, so you can directly connect it to 3-12V 10W LED lights, you charge a small battery directly, maximum current when charging is 220mA, because the output electricity will be used promptly when charging,so the voltage will be automatically maintained at about 14V, and to maintain the most appropriate voltage so that all the output electricity can be used to charge a small battery.
Technical conditions:
(1) Maximum output voltage :80V (1.2Mpa)
(2) Maximum output current :≥220mA (12V)
(3) Inter-wire resistive: 10.5 ± 0.5Ω
(4) Insulation resistance :10MΩ (DC100 megger)
(5)Water closed outlet maximum pressure :0.6Mpa
(6) Water opening outlet maximum pressure: 1.2Mpa
(7) Starting pressure: 0.05Mpa
Mechanical properties and the operating environment:
(1) Appearance: clean surface, no rust, no significant scratches, firm structure.
(2) Axial clearance: 0.2-1.0mm
(3) Mechanical noise ≤55dB
(4) Single generating volume: 90g or so
(5) Life time: ≥3000h
(6) Output Characteristics
output voltage without regulator circuit is proportional to water pressure