Danfoss electronic expansion valve(ETS50B/034G1005/1705)product introduction
QQ:17800208 email:178000208@qq.com
Usage: danfoss ETS series electronic expansion valve used in air conditioning and refrigeration, precise control of liquid refrigerant injection evaporator. Valve piston and linear positioning design can achieve balance in full, so that the fluid in the forward and reverse characteristics of the two flow direction. In addition, it has double check function, like electromagnetic valve closed tightly. Bipolar drive valve design provides accurate flow control. Can use other manufacturers of DANFOSS and electric control scheme. ETS design has applied for patent.
Features: accurate location to ensure that the refrigerant injection quantity optimal control; Applicable to various common refrigerant (R410A and R407C, R404A, everything, R22); ETS12.5 ETS25, ETS50 and ETS100 maximum working pressure of 45.5 bar (660 psig). ETS250 and ETS400 maximum working pressure is 34 bar (493 psig); ETS50 to ETS400 electronic expansion valve design to realize the dynamic balance of not only enables the valve to the bidirectional flow operation, also has the double check function, like electromagnetic valve closed tightly; ETS50 and ETS100 anhydrous welding joint, make welding without wet cloth package, convenient and quick. ETS50 to ETS400 electronic expansion valve are depending on the liquid mirror has a built-in. Internal and external anti-corrosion design. Low power consumption. Can choose according to the requirement cables and connectors. EKC316A, EKC312 and danfoss EKD316 are commonly used for driving the ETS electronic expansion valve controller. Provide AST - g hand of electronic expansion valve is used to ETS manual operation and maintenance.
Electrical parameters: stepper motor models: a bipolar permanent magnet, the stepping mode: two phase step; Phase resistance: 52 ohm + / - 10%; The phase inductance: mh 85; Maintain current: according to the actual application; Allow enough current loading operation (100%); The stepping Angle: 7.5 ° (motor), 0.9 ° (guide screw), adjusting the ratio of 8.5:1 (38/13) squared: 1; Nominal voltage (constant voltage driver) 12 VDC - 4% + 15%, 150 steps per second, phase current (using the cutoff wave drive) 100 ma RMS - 0.4% + 15%; Maximum total power, voltage/current driver: 5.5/1.3 W (UL: ENC lass2); Step step rate: 150 / SEC (constant voltage driver), step 0-300 / SEC 300 recommended (cutoff wave current drive); Total number: ETS12.5 ETS25, ETS50:2625 ETS100:3530 ETS250 and ETS400:3810 full time consuming: ETS12.5, ETS25, ETS50:17/8.5 S ETS100:23/11.5 S ETS250 and ETS400:25.4/12.7 S; Hoisting height: ETS12.5, ETS25 ETS50:13 MM ETS100:16 MM ETS250, 400:17.2 MM; Reference position: beyond the headquarters for drive, ensure that the valve in a fully closed position, and location as the reference position of valve. Electrical connections: 4 squared line 0.5 mm (0.02 in squared), 2 m (6.5 ft) long cable.
Technical parameters of various sizes: electronic expansion valve ETS12.5 g4210/034/034 g4211, interface is 16 and 22 respectively, R22 refrigerating capacity biggest cold 16 tons; Electronic expansion valve ETS25/034 g4202 g4203/034/034 g1220, interface is 16 and 22 respectively, R22 refrigerating capacity biggest 34 tr. Electronic expansion valve ETS50 g1705/034/034 g1007, interface for 22 * 28, 62 tr R22 maximum refrigerating capacity; Electronic expansion valve ETS100/034 g0006 g0008/034/034 g0508, interface 35 * 35, R22 115.4 TR maximum refrigerating capacity; Electronic expansion valve ETS250 g2001/034/034 g2602 g2002/034/034 g2601 interface is 35 and 42, respectively, R22 refrigerating capacity is 319 largest tr. Electronic expansion valve ETS400/034 g3003 g3001/034/034 g3501, interface * 54, 54 R22 maximum refrigerating capacity 509 tr
Can be used in the electronic expansion valve of CO2: ETS12.5/034 g4220, ETS25/034 g4219, ETS50/034 g1714, ETS100 g0515/034
For more detailed parameters, please contact with guangzhou, zhuo trade co., LTD
