When you have a height restriction, a "pancake" slip rings - also called a "flat" or "platter" ring - could be the best solution. These slip ring units are based on a disc shaped rotor, which is embedded with concentric grooves to carry the signal and power, with a brush block assembly mounted over the top to act as the stator. We can customize this type of slip ring from 4 to 50 channels,and any center bore size. Contacts use precious metals and operating speed depends on the number of channels and overall size of slip ring.
A.)Features:
● Ultra-thin design,the thickness reaches 15 mm min;
● Center bore size can be customized;
● Multi circuits/channels design can deliver both power & signal data at the same time.
● Without any maintain.
B.)Specification:
Voltage : |
240V AC/DC |
Current Rating : |
10A/Ring |
Insulation Resistance : |
1000MΩ@500VDC |
Dielectric Strength : |
AC 600V@60Hz, 60S |
Electrical Nosie : |
70 milliohms MAX @5rpm,50milliamps,6V DC |
Contact Material : |
Precious metal |
Lead Size/Type : |
1.0mm2 Teflon wire |
Operate Temp : |
-20℃~ +80℃
|