Gypsum board making plant 

Machine introduction:                                                                               

The capacity	2 to 30 million sq.m per year
Type	Hot air  Heat conduction oil type
Degree of automation	Full-automatic Semi-automatic
Fuel for the gypsum board making plant	Natural gas Coal Diesel Heavy oil Light oil etc
Raw materials	Gypsum powder Modified starch Foaming agent Fiberglass Faced paper Electricity Water White emulsion
Gypsum board product specification	Thickness: 7 to 15mm  Width: 1200, 1220mm  Length: 2000-3600mm Type:Common,waterproof ,fireproof ,damp-proof  Quality of final products, being conformity with GB/T9775-1999
Material balance calculation per sq.m	Gypsum powder:6kg Modified starch:30g Foaming agent:10g Faced paper:380g Water:4.2kg White emulsion:5g Power consumption:0.157kwh

Detail show:                                                                                                        

 

 

1.Paper supply system

 

lThe special pneumatic shaft

 

lMagnetic powder brake

 

lExact paper connection device

 

lHigh definition automatic device

 

l High definition automatic alignment device

 

2.Mixing system

lMainly consists of paper slurry,foaming agent,starch,water and additive etc

lAll slurry has the feedback signal of level indication and chain control each batching process according to the process requirement

 

3.Forming system

lThis part is mainly the forming of wet gypsum board

l Can be adjusted manually

 

4.Conveying system

lThis part is composed of two sets solidification belt machine and one conveying roller machine.

l The three machines need to run synchronically.

5.Cutting system

  l Whole cut control algorithm is achieved by the separate PLC.

 

6.Transferring system

 l This part mainly function is gypsum board acceleration conveying,overturning,transit conveying and lifting.

7.Dryer system

l Low heat consumption, heat preservation is good

8.  Finished products converying system

lThis part mainly includes fast outlet,sizing and stacking which are all equipped double.

 

9.Fast outlet system

l Can achieve the equipment failure without stopping.

10.Sizing system

lThis part consists of transverse machine,storage roller,board colse folder and sizing device.

 

11.Stacking system

lThis part consists of two sealing machines,stackers.

12.Control center system

lHost part adopts RS VIEW as the monitoring software table to monitor the whole production process.

lThe general monitoring system displays the production process in front of operators and managers.

 

Factory show:                                                                                                       

 

 

 

 Maybe you have the same questions as follows: 1.Why 

1.Why price is high?                                                                                                                         

A:Where do you think high?Which product make you feel ours is high?In the current market,there is no cheap one than us during the same level.If you want to say small workshop,indeed,their machine is cheaper,but not on the same level.2.How

much is your cost?                                                                                                     

2.How much is your cost?     

A:Do you have a well known about our product?If not,you can not judge fairly about our machines whether cheap or expensive.You care about price because you want have profit.Know more about our product and marketing strategies,or take a visit of our factory,you will know well about price.

 

 3.Why your price is cheap?                                                                                                                             

A:That is our selling points and product strategies.First,we buy a large number of material,and reduce the cost.Second,we have good faith management,no bad assests,the mnagement can be maximized efficiency.And last,Our management idea is a cost-effective way,low profits,low price.If you have sincere buying our machine,we can discuss price.

 

4.Do you have quality assurance?                                                                                                                  

A:Definitely,we have.If we can not assure the quality,can I sell to you?I seek to a long business cooperation,not only once.

We have passed ISO9001.

Our service:

(1)Turnkey solution inquiry

(2)One year for free maintainence

(3)One year for free for replacing machine parts

(4)Workshop layout design

 

5.What should do if happens quality problem?                                                                                             

A:No one wants problems.The reason caused by delivery,we will analyse at once,if our problems,we take responsibility,pls don’t worry,we will follow by the contract,solve problems immediately and provide good service to you.

This is Rubin Industry and hope we can work together for better future!

Any questions about gypsum board making plant ,pls contact us.

Contact person-Myra

Mob No------+8613832120199  

Whatsapp------+8613832120199

Skype-------myra.qin