Differential pressure transmitter

Introduction

Differential pressure transmitter is a measure of the difference between the two ends of the transmitter ,output standard signal (eg 4 ~ 20mA, 1-5V) differential pressure transmitter and pressure transmitter with the general difference is that there are two pressure ports, the differential pressure transmitter is generally divided into positiveand negative terminal end, under normal circumstances, Positive pressure side 

pressure should be greater than the negative pressure section.                                    

Features:

 1. Process Fluid: Liquid, Gas, Vapor 

 2. Applicat ion: Differential Pressure, Gauge Pressure,Absolute Pressure  

 3. Working Temperature: -25 to +95C   

 4. Current Output: 4 - 20 mA   2 wires   Har t Protoco

 5. Power Supply: 24VDC

 6. Ambient Temperature: -25 to +240

 7. Process connections: 1/4 - 18 NPT or 1/2 - 14 NPT 

 8. Electrical Connections: 1/2”NPT or M20*1.5

 9. Enclosure:IP65

 10.Intrinsically Safe: ia II C T6  

 11.Explosion proof: d II B T5 

Differential pressure transmitter for measurement of liquids, gases and steam level,

density and  pressure, and then convert it into 4- 20mA DC current signal output.

3051DP BRAIN can also be handheld or CENTUM CS / μXL or HART 275 handhel

communicate with each other, through the setting and monitoring them.

Package Size: Length200mm *Width 230mm *high 280mm

Packaged Weight: 4.5 kg