Oil-Tempered Clutch & Valve Spring Wire

Oil-Tempered Clutch & Valve Spring Wire
Model:OT Clutch Wire
Brand:Oil-Tempered Clutch & Valve Spring Wire
Origin:Made In Italy
Category:Industrial Supplies / Machinery / Internal-Combustion Engine
Label:OT Clutch Wire , OT Valve Wire , OT Spring Wire
Price: -
Min. Order:-

Product Description

Oil-Tempered Clutch & Valve Spring Wire

We are Stockholder & Distributors of Oil Tempered SiCr-Alloyed Wires for Valve Springs, SWOSC-V Oil Tempered Wire, SWOSC-V OT Wires, SWOSC-VU Oil Tempered Wire, SWOSC-VU OT Wires, SAE 9254 Wire, SAE9254 Wires, SAE 6150 Wire, SAE6150 Wires, SAE 1070 Wire, SAE1070 Wires, SWOSC-VH Oil Tempered Wire, SWOSC-VH OT Wires, HRS7-V Oil Tempered Wire, HRS7-V OT Wires, SWOSC-VT Oil Tempered Wire, SWOSC+VT OT Wires, KHV7 Oil Tempered Wire, KHV7 OT Wire, SWOSC-VX Oil Tempered Wire, SWOSC+VX OT Wires, KHV10N Oil Tempered Wire, KHV10N OT Wires, SWOSC-VXT Oil Tempered Wire, SWOSC+VXT OT Wires, KHV12N Oil Tempered Wire, KHV12N OT Wires, OTEVA 70 Oil Tempered Wire, OTEVA-70 OT Wires, SiCrVMoW Oil-Tempered Wire, SiCrVMo Oil-Tempered Wire, SiCrVNi Oil-Tempered Wire, SiCrV Oil-Tempered Wire, SiCr Oil-Tempered Wire, SWOSC-VHV Oil-Tempered Wire, SWO-V Oil-Tempered Wire, 75KD SiCrV Oil-Tempered Wire, STATO 75 SiCrV Oil-Tempered Wire, STATO 70 SiCr Oil-Tempered Wire, PENTHOR-864 Oil-Tempered Wire, PENTHOR-854 Oil-Tempered Wire, PENTHOR-843 Oil-Tempered Wire, PENTHOR-842 Oil-Tempered Wire, PENTHOR-811 Oil-Tempered Wire, PENTHOR-911 Oil-Tempered Wire, KISWIRE Oil-Tempered Wire, SUZUKI GARPHYTTAN Oil-Tempered Wire, PENGG USHA MARTIN Oil-Tempered Wire, PENGG AUSTRIA Oil-Tempered Wire, Oil-Tempered Wires for Valve Springs 

 

Our Product Finish          Size Range (mm)   End Application
AUTO CABLE WIRE Black/Galvanised 0.13-2.80 Auto Speedometer cable inners & Rolling Quality for Auto cable Outers.
SPRING STEEL WIRE Black 0.13-4.50 Grades I, II & III for making Springs used in Auto & Engg. Sectors
UPHOLSTRY SPRING WIRE    Black 1.40-4.00 For making Springs in Upholstry & Mattresses
FLEXIBLE SHAFT WIRE Black 0.30-1.80 Used in making Flexible Shafts
FLOAT WIRES  Black       1.80-2.50 For making Wire Forms used in Auto sector and float-assembly in fuel tanks.
OIL SEAL WIRES Galavanised 0.20-0.60 Used in making Oil-Seals
HAIR PIN WIRES Black 0.80-1.60      Used in making Hair-pins
ROPERY WIRES Black/Galvanized 0.13-3.00 Used in manufacture of Wire Ropes
ACSR CORE WIRES Galvanized 1.50-4.09 For use as steel reinforcement in Aluminium conductors for Extra High/Normal voltage overhead transmission.
roduct Size Range (mm) Specification Grade Application
Galvanised Iron (G.I.) 
(Hot Dipped & Electroplated)
0.63-5.00 IS 280 
As per customer’s requirement
Mild Steel Galvanised wire for General Engineering Purpose, I.E. netting, fencing, barbing and other applications.
Galvanised Steel Strand 7x1.50 
to 7x4.75
IS 2141, IS:12776 ASTMA 473, ASTMA 363, BS 183, DIN 48200, 48201, 48202, VEDO 210 Mild Steel / High Carbon, Medium Carbon Wires for electrical & transmission lines
H.B. Wires for Nails 0.63-10.0 As per Customer’s requirement Mild Stee Wires for Nail Industry
Cable Armour Wires (Round) 0.63-4.0 IS 3975, BS 1441 As per customer’s requirement Low Carbon / Electrode Wires for Cable and Conductor Industry
Cable Armouring Formed Wire 4x3.4x0.8 IS 3975, BS 1441 Low Carbon / Electrode Cable Industry
ACSR Core Wire Single 1.50-4.75 IS 398 Part 2&5 
ASTMB 498, BS 4565, IEC 209
High Carbon Wires for Conductor Industry.
ACSR Core Wire Stranded 7x1.5 To 7x4.75 IS 398, 
ASTM-B 500, 
BS 215 PART-2
High Carbon Wires for Conductor Industry
P.C. Single (as drawn) 1.50-5.00 IS 1785-II, 
ASTM-A 648, 
BS 2962-SEC I/IV
High Carbon Wires for Prestressed Concrete Industry
P.C. Single Wire Stress Relieved (Normal Relaxation) 3.00-9.50 IS 1785-I (Plain), 
IS 6003 (Indented) 
ASTM-4421, BS 2691 
SEC 1/77
High Carbon For re-enforcement of Concrete Poles & other Concrete Structures)
P.C. Strand 3 Ply Stress Relieved (Normal Relaxation) 3X3.00 IS 6003 
ASTM-A 416 
BS 3617 
JIS-G 3536
High Carbon For re-enforcement of Concrete Rly. Sleeper.
P.C. Strand 7 Ply Stress Relieved (Normal Relaxation) 6.35-12.50 IS 6006, 
ASTM - A416 
BS 3617, 
JIS G 3536
High Carbon For re-enforcement of Concrete Beams in bridges / concrete poles etc.
Bright Spoke Wire 1.80- 4.00 IS 6902, 
BS 2453 
As per customer’s requirement
High Carbon Wires for Cycle & Two Wheeler Industry
Galvanised Spoke Wire 1.80-4.00 IS 6902, BS 2453 
As per customer’s requirement
High Carbon For making Spokes for Cycles & Two Wheelers.
Cycle Accessories Wire 2.00-10.00 As per customer’s requirement Mild Steel Wires for Cycle & Two Wheeler Industry
Shutter Spring Wire 4.00-9.50 As per customer’s requirement High Carbon For making Spring of Rolling Shutters
Spring Steel Wire 0.30-8.50 IS 4454 Part 1  GradeI/II/III/IV High Carbon Springs
Telegraph Wire 2.00–5.60 IS 279, IS 280 Mild Steel Telecom Industry
Rope Wire (Black & Galvanised) 0.30-2.00 IS: 1835, BS: 2763 
As per customer’s requirement
High Carbon Rope making & Auto cables
Umbrella Rib 1.50–3.0 As per customer’s requirement High Carbon Umbrella Industry
Chain Rivet / Link Wire 3.60-6.00 As per customer’s requirement Mild Steel 
16Mn Cr5 
20Mn Cr5 
EN 353, 354
Chain & Two-wheeler Industry
Cotton Bailing Wires 3.15-3.66 As per customer’s requirement High Carbon For Cotton Bailing industry
Spring Steel – Medium Carbon Wire
Indian Standard : IS 4454 Part I, Grade-2
Equivalent International Standards : ASTM A 227
UNI 3823 Class B
DIN 17223-1-1.0600
DIN 2076-B
EN 10270-1(SM, DM)
JIS-3522
Chemical Composition
Carbon(C) : 0.60-0.85
Manganese (Mn) : 0.80 Max
Silicon (Si) : 0.15-0.35
Phosphorus (P) : 0.04 Max
Sulphur(S) : 0.04 Max
 
 
Spring Steel – High Carbon
 
Indian Standard : IS 4454 Part I Grade 3
Equivalent International Standards : ASTM A 228
UNI-3823 Class C
DIN 17223-1-1.0200
DIN 2076-C
EN 10270-1-(SH, DH)
JIS – 3522
Chemical Composition
Carbon(C) : 0.75-1.00
Silicon (Si) : 0.15-0.35
Manganese (Mn) : 0.80 Max
Phosphorus (P) : 0.03(Max)
Sulphur (S) : 0.03(Max)
 
 
Spring Steel – Oil tempered Alloy Steel Wire
 
Indian Standard : IS 4454 Part III, Grade-2D (Chrome Silicon)
Equivalent International Standards : ASTM A-401
DIN-17223-2 FDSiCr
DIN-17223-2-VDSiCr
EN-10270-2 FDSiCr
EN 10270-2-VDSiCr
Chemical Composition
Carbon(C) : 0.50-0.60
Silicon (Si) : 1.20-1.60
Manganese (Mn) : 0.50-0.80
Chromium (Cr) : 0.50-0.80
 
 
Stainless Steel Wire
 
Indian Standard : IS 4454 part-IV Gr- 1 & 2
Equivalent International Standards : AISI 302
AISI 304
ASTM A 313
DIN 17224
EN 10270-3
Chemical Composition
    GR-1 GR-2
Carbon(C) : 0.15 Max 0.09 Max
Silicon (Si) : 1.00 Max 1.00 Max
Manganese (Mn) : 2.00 Max 1.00 Max
Chromium (Cr) : 17-19 16.00-18.00
Nickel(Ni) : 8-10 6.75-7.75

 

HIGH CARBON SPRING STEEL WIRES

We can supply High Carbon Spring Steel Wires to the customer requirement within the specification as per IS : 4454 (Part-1) - 1981 and IS: 4454 Part 2 - 2001. Wires availbale are Grade I, Grade II, Grade III, Grade IV, Flattening Quality (FQ) in both black and galvanized and Oil tempered (OT wire)/ 2D wires in desired sizes. The wire supplied by us are used for a vast variety of purposes with some of the major ones being:

GRADE

APPLICATION

Grade 1 (As per IS 4454 Part 1 - 1981) /

 

Grade SL (As per IS 4454 Part 1 - 2001)

1. Auto components after flattening of wire. 
2. Steel screen for iron ore and coal industries. 
3. Wire shaped products made from wire forming.

 

Flattening Quality (FQ)

 

1. Auto cables

 

2. Formed auto components

Grade 2 (As per IS 4454 Part 1 - 1981) /

 

Grade SM (As per IS 4454 Part 1 - 2001)

  

 Tension & Torsion springs for use in Industrial / Auto sector  

 

Grade 2 (As per IS 4454 Part 1 - 1981) /

 

Grade SM (As per IS 4454 Part 1 - 2001)

 

High precision torsion & Compression spring used in Industrial & Auto sector.

 

Oil tempered wire (OT wire) - Penthor 811, 843 & 864

                                                                             (As per IS 4454 Part 2 - 2001)

 

High precision torsion & Compression spring used in Industrial & Auto sector.

Alloy C Mn P S Si Cr Other  
C1010 .08-.13 .30-.60 0.040 0.050        
C1050 .48-.55 .60-.90 0.040 0.050        
C1075 .70-.80 .40-.70 0.040 0.050        
C1095 .90-1.03 .30-.50 0.040 0.050        
HDMB .45-.85 .30-1.30 0.040 0.050 .15-.35      
OTMB .55-.85 .30-1.20 0.040 0.050 .15-.35      
MUSIC WIRE .70-1.00 .20-.60 0.025 0.030 .10-.30      
CHROME SILICON .51-.59 .60-.80 0.035 0.040 1.20-1.60 .60-.80    
CHROME VANADIUM .48-.53 .70-.90 0.040 0.040 .15-.35 .80-1.10 V  .15
Alloy     Characteristics       Typical Specification
C1010 Basic Steel, good formability, not heat treatable     ASTM  A-805
C1050 Good formability in the annealed condition, heat treatable to higher hardness,  
C1075 higher carbon content contributes to higher hardness     ASTM  A-805
C1095                
HDMB Spring wire, suitable for parts subjected to high stress and /or infrequent stress ASTM  A-227
  repetitions              
OTMB Spring wire, similar to HDMB, better suited for some applications because of the ASTM  A-229
  tighter control of the tensile strength and better straightness of OTMB    
MUSIC WIRE Spring wire, good for parts subjected to high stresses and requiring good ASTM  A-228
  thermal properties            
CHROME SILICON Spring wire, high endurance properties at elevated temperatures   ASTM  A-401
CHROME VANADIUM Spring wire, high fatigue properties at elevated temperatures   ASTM  A-231

OTEVA® 101 SC, Oil tempered SiCrVMoW-alloyed ultra-high tensile clutch and transmission spring wire for surface nitriding 
Product sheet     
Description:    OTEVA® 101 SC is a Super Clean steel especially intended for the manufacture of clutch and transmission springs and other springs requiring high fatigue properties and good relaxation properties at increased working temperatures. Manufactured as standard in shaved condition in sizes from Ø 2.00 mm to 5.00 mm or in egg or elliptical shape corresponding to round cross section 2.50 mm to 5.00 mm. Other wire sizes on request.

OTEVA® 91 SC, Oil tempered SiCrVMo-alloyed ultra-high tensile valve spring wire for surface nitriding 
Product sheet     
Description:    OTEVA® 91 SC is a Super Clean steel especially intended for the manufacture of valve springs and other springs requiring extremely high fatigue properties and good relaxation properties at increased working temperatures. Manufactured as standard in shaved condition in sizes from Ø 2.00 mm to 6.00 mm or in egg or elliptical shape corresponding to round cross section 2.50 mm to 6.00 mm. Other wire sizes on request.

OTEVA® 90 SC, Oil tempered SiCrVNi-alloyed ultra-high tensile valve spring wire for surface nitriding 
Product sheet     
IMDS No.:    4982603 / 1 
Description:    OTEVA® 90 SC is a Super Clean steel especially intended for the manufacture of valve springs and other springs requiring extremely high fatigue properties and good relaxation properties at increased working temperatures. Manufactured as standard in shaved condition in sizes from Ø 2.00 mm to 6.00 mm or in egg or elliptical shape corresponding to round cross section 2.50 mm to 6.00 mm. Other wire sizes on request.

OTEVA® 76 SC, Oil tempered SiCrVNi-alloyed high tensile valve spring wire - Only manufactured in USA and China 
Product sheet     
Description:    OTEVA 76 SC is a Super Clean steel, especially intended for the manufacture of valve springs and other springs requiring high fatigue properties and good relaxation properties at moderately increased working temperatures. Manufactured as standard in shaved condition and in sizes from Ø 2.00 mm to 6.00 mm, or in egg or elliptical shape corresponding to round cross section 2.50 mm to 6.00 mm. Other wire sizes on request.

OTEVA® 75 SC, Oil tempered SiCrV-alloyed high tensile valve spring wire 
Product sheet     
IMDS No.:    47544916 / 1 
Description:    OTEVA® 75 SC is a Super Clean steel especially intended for the manufacture of valve springs and other springs requiring high fatigue properties and good relaxation properties at moderately increased working temperatures. Manufactured as standard in shaved condition in sizes from Ø 1.60 mm to 6.00 mm or in egg or elliptical shape corresponding to round cross section 2.50 mm to 6.00 mm. Other wire sizes on request.

OTEVA® 70 SC, Oil tempered SiCr-alloyed valve spring wire 
Product sheet     
IMDS No.:    12364020 / 1 
Description:    OTEVA® 70 SC is a Super Clean steel especially intended for the manufacture of valve springs and other springs requiring high fatigue properties and good relaxation properties at moderately increased working temperature. The wire is manufactured in shaved or unshaved condition (Ø 6.50 – 14.00 mm in unshaved condition subcontracted) in sizes from Ø 0.50 mm to 6.50 mm, or in egg or elliptical shape corresponding to round cross section 2.50 mm to 6.00 mm. Other wire sizes on request.

SWOSC-VHV, Oil tempered SiCrV-alloyed high tensile valve spring wire - Only manufactured in China 
Product sheet     
Description:    SWOSC-VHV is a Super Clean steel, especially intended for the manufacture of valve springs and other springs requiring high fatigue properties and good relaxation properties at moderately increased working temperatures. The wire is manufactured in shaved condition in sizes from Ø 1.60 mm to 6.50 mm, or in egg or elliptical shape (corresponding to round cross section 2.50 mm to 6.50 mm). Other wire sizes on request.

SWOSC-V, Oil tempered SiCr-alloyed valve spring wire - Only manufactured in China 
Product sheet     
Description:    SWOSC-V is a Super Clean steel, especially intended for the manufacture of valve springs and other springs requiring high fatigue properties and good relaxation properties at moderately increased working temperature. The wire is manufactured in shaved condition in sizes from Ø 1.60 mm to 6.50 mm, or in egg or elliptical shape (corresponding to round cross section 2.50 mm to 6.50 mm). Other wire sizes on request.

75 KD, Oil tempered SiCrV-alloyed clutch and transmission spring wire 
Product sheet     
Description:    75 KD is especially intended for the manufacture of clutch and transmission springs and similar moderately high fatigue stressed springs. The material has good relaxation properties. The wire is manufactured in sizes from Ø 1.60 to 7.00 mm. Other wire sizes on request.

70 KD, Oil tempered SiCr-alloyed clutch and transmission spring wire 
Product sheet     
IMDS No.:    673628 / 1 
Description:    70 KD is especially intended for the manufacture of clutch and transmission springs and similar moderately high fatigue stressed springs. The material has good relaxation properties. The wire is manufactured in sizes from Ø 0.50 to 7.00 mm.

STATO 75, Oil tempered SiCrV-alloyed spring wire 
Product sheet     
Description:    STATO 75 is especially intended for the manufacture of springs exposed to static or moderately high fatigue stresses. The material has good relaxation properties. The wire is manufactured in sizes from Ø 2.00 mm to 7.00 mm. Other wire sizes on request.

STATO 70, Oil tempered SiCr-alloyed spring wire 
Product sheet     
Description:    STATO 70 is especially intended for the manufacture of springs exposed to static or moderately high fatigue stresses. The material has good relaxation properties. The wire is manufactured in sizes from Ø 0.50 mm to 7.00 mm.

 

Inspection & Approval Certificates : C/W Certificate (Calibration Works Certificate) EN 10204 3.1 / DIN 50049 3.1 / ISO 10474 3.1 Mill Test Certificate, NACE MR-0103 / NACE MR-0175 / ISO 15156, CE Marked, European Pressure Equipment Directive PED-97/23/EC, AD-2000-WO, ASME Boiler & Pressure Vessel Code Sec.II Part A Ed. 2008, API 6A (American Petroleum Institute), with 3.2 certificate duly Certified & Approved by LRS (Lloyd's Register), GL (Germanischer Lloyd), BV (Bureau Veritas), DNV (Det Norske Veritas), ABS (American Bureau of Shipping), SGS, TUV, RINA, IRS, NORSOK Approved Standard M-630, M-650 Rev.3      
 

If you have any requirement of above items, please feel free to contact us


Regards,


CONTACT PERSON :

 


MUKESH SHAH      
Director       
Mobile No. 0091 - 9820292499       
Email - 
marketing@rolexmetals.com


ROLEX METAL DISTRIBUTORS       
( A METAL & STEEL Company )       
57-A, KHATARGALLI,       
THAKURDWAR,       
MUMBAI - 400002, INDIA.       
TEL.No. 0091-22-23858802       
TEL.No. 0091-22-23823963       
FAX No. 0091-22-23898724       
Email - 
marketing@rolexmetals.com       
Website – www.rolexmetals.com

       
 

CHAIRMAN – chairman@rolexmetals.com

MANAGING DIRECTOR – managingdirector@rolexmetals.com

TECHNICAL DIRECTOR – technicaldirector@rolexmetals.com

SALES DIRECTOR – salesdirector@rolexmetals.com

COMMERCIAL DIRECTOR – commercialdirector@rolexmetals.com

 

COMMERCIAL MANAGER – commercial@rolexmetals.com

GENERAL MANAGER – generalmanager@rolexmetals.com

SALES MANAGER – salesmanager@rolexmetals.com

PURCHASE MANAGER – purchasemanager@rolexmetals.com

TECHNICAL MANAGER – technical@rolexmetals.com

WORKS MANAGER – worksmanager@rolexmetals.com

STORES MANAGER – stores@rolexmetals.com

WAREHOUSE MANAGER – warehouse@rolexmetals.com

SALES DOMESTIC – salesdomestic@rolexmetals.com

SALES INTERNATIONAL – salesinternational@rolexmetals.com

SALES GENERAL – sales@rolexmetals.com

PURCHASE GENERAL – purchase@rolexmetals.com

FINANCE MANAGER – finance@rolexmetals.com

ACCOUNTS MANAGER – accounts@rolexmetals.com

GENERAL INFORMATION – info@rolexmetals.com

 

EXPORT MANAGER – export@rolexmetals.com

IMPORT MANAGER – import@rolexmetals.com

AIR EXPORT – airexport@rolexmetals.com

SEA EXPORT – seaexport@rolexmetals.com

CUSTOMS – customs@rolexmetals.com

 

AIR FREIGHT – airfreight@rolexmetals.com

SEA FREIGHT – seafreight@rolexmetals.com

DESPATCH – despatch@rolexmetals.com

INSPECTION – inspection@rolexmetals.com

LOGISTICS – logistics@rolexmetals.com

TRANSPORT – transport@rolexmetals.com

 

KALAMBOLI WAREHOUSE – kalamboli@rolexmetals.com

TALOJA WAREHOUSE – taloja@rolexmetals.com

KHOPOLI WAREHOUSE – khopoli@rolexmetals.com

NHAVA SHEVA WAREHOUSE – nhavasheva@rolexmetals.com

KANDLA WAREHOUSE – kandla@rolexmetals.com

MUMBAI WAREHOUSE – mumbai@rolexmetals.com

STOCKYARD – stockyard@rolexmetals.com

 

SERVICE – service@rolexmetals.com

SUPPORT – support@rolexmetals.com

RECRUITMENT – career@rolexmetals.com

WEBMASTER – webmaster@rolexmetals.com

CUSTOMER CARE – customercare@rolexmetals.com

 

 

Oil-Tempered Clutch & Valve Spring Wire 1

Member Information

ROLEX MATERIALS CORPORATION
Country/Region:India
Business Nature:Trading Company
Phone:0091-9820292499
Contact:MUKESH SHAH (DIRECTOR)
Last Online:24 Aug, 2024