FullJet Spray Nozzles
1. Standard angle spray
(1) Features and benefits
- Solid cone-shaped spray pattern with round impact area.
- Uniform distribution over a wide range of flow rates and pressures.
- Medium-to large-sized drops.
- Unique vane design with large flow passages provides superior control and uniform distribution.
- Removable caps and vanes for easy inspection and cleaning on most modes.
- Removable vane has location marks for proper positioning after cleaning.
(2) Applications
- Cooling coke, primary metals and other materials
- Creation/ dispersion of drops in chemical reaction processing.
- Dust control.
- Fire suppression/ prevention.
- Gas scrubbing, washing, cooling.
- Washing/ rising.
2. Wide angle spray
(1) Features and benefits
- Wide-angle solid cone-shaped spray pattern with round impact area and spray angles from 110 degree to 120 degree.
- Unique vane design with large flow passages provides superior control and uniform distribution.
- Removable caps and vanes for easy inspection and cleaning on most modes.
- Removable vane has location marks for proper positioning after cleaning.
(2) Applications
- Cooling of primary metals and other materials.
- Creating and dispersing drops in chemical reaction processing.
- Deluging combustible materials and storage tanks for fire suppression/ prevention.
- Dust control in the processing of bulk ores, coal, limestone, sand, gravel.
- Foam break-up, aeration, deaeration.
- Gas scrubbing, washing, cooling.
- Washing/ rinsing.
3. Narrow angle spray-15 degree/ 30 degree
(1) Features and benefits
- Solid narrow angle cone-shaped spray pattern with round impact area and spray angles of 15 degree and 30 degree at 2.8 bar.
- Significantly higher impact per unit area than wider angle nozzles at the same flow area.
- Unique vane design with large flow passages provides superior control and uniform distribution.
- Removable caps and vanes for easy inspection and cleaning on many models.
(2) Applications
- Cleaning and washing that requires deep penetration and/ or spray induced turbulence.
- Cooling and cleaning the inside of ducts and pipes.
- Desuperheating of steam.