FullJet Spray Nozzles 

1. Standard angle spray

(1) Features and benefits

• Solid cone-shaped spray pattern with round impact area.
• Uniform distribution over a wide range of flow rates and pressures.
• Medium-to large-sized drops.
• Unique vane design with large flow passages provides superior control and uniform distribution.
• Removable caps and vanes for easy inspection and cleaning on most modes.
• Removable vane has location marks for proper positioning after cleaning. 

(2) Applications

• Cooling coke, primary metals and other materials
• Creation/ dispersion of drops in chemical reaction processing.
• Dust control.
• Fire suppression/ prevention.
• Gas scrubbing, washing, cooling.
• Washing/ rising.

2. Wide angle spray

(1) Features and benefits

• Wide-angle solid cone-shaped spray pattern with round impact area and spray angles from 110 degree to 120 degree.
• Unique vane design with large flow passages provides superior control and uniform distribution.
• Removable caps and vanes for easy inspection and cleaning on most modes.
• Removable vane has location marks for proper positioning after cleaning. 

(2) Applications

• Cooling of primary metals and other materials.
• Creating and dispersing drops in chemical reaction processing.
• Deluging combustible materials and storage tanks for fire suppression/ prevention.
• Dust control in the processing of bulk ores, coal, limestone, sand, gravel.
• Foam break-up, aeration, deaeration.
• Gas scrubbing, washing, cooling.
• Washing/ rinsing.

3. Narrow angle spray-15 degree/ 30 degree

(1) Features and benefits

• Solid narrow angle cone-shaped spray pattern with round impact area and spray angles of 15 degree and 30 degree at 2.8 bar.
• Significantly higher impact per unit area than wider angle nozzles at the same flow area.
• Unique vane design with large flow passages provides superior control and uniform distribution.
• Removable caps and vanes for easy inspection and cleaning on many models.

(2) Applications

• Cleaning and washing that requires deep penetration and/ or spray induced turbulence.
• Cooling and cleaning the inside of ducts and pipes.
• Desuperheating of steam.