The PrecisionHD Camera 1080p12x
Part number: CTS-PHD-1080P12XG=/ CTS-PHD-1080P12XS=
HDMI and HD-SDI
• HDMI is the main video source. The maximum resolution
is 1080p60.
• HD-SDI* is the secondary video source. The maximum
resolution is 1080p30.
• The HDMI and HD-SDI* can be used simultaneously. The
maximum resolution is 1080p30, if you want both to run
with the same resolution.
Camera control
Camera control is used for controlling the pan, tilt and zoom,
and for powering up the camera.
Power
• When the camera is used with a Cisco Codec, power is
supplied through the Camera Control cable.
• When the camera is used with non-Cisco codecs, you may
have to connect the power separately.
Extra camera
For multi-camera setup, e.g. when you connect cameras in a
daisy chain**:
• The first camera in the chain is powered by the camera control
cable. The next must use the 12V DC Power in.
• Use an extra camera cable between the Extra Camera sockets.
Ethernet
For software upgrades on daisy chained cameras. Requires
software version TC3.0 or higher on the Codec C series.
Kensington lock
The Kensington lock may be used to prevent the camera from
being moved from its place or to prevent theft.