Feature:

 1:Splice tape with clip is an innovative design consisting of a single clip and splice tape as an integrated part.
 2:The splice tape and metal clip and connected with a carrier. This makes it easier to use clips and tape.

 3:It is easier to place the metal clips in the tool.

 4:It is easier to align the tape, which gives you more control of the tape.

 5:The process of splicing using this product is operator convenient and provides accurate and reliable splice joint.

 6:The carrier is removed when the clip and tape are in place. This product fits all types of SMD carrier tape (paper and plastic) and is able to pass through most of component feeders. The products are available in widths 8/12/16/24mm and colors yellow, blue, black, green.

Description:

guarantee perfect and reliable joints in 8 mm punched SMD tapes. Joining is accomplished without any tools or fixtures, with precise pitch spacing, using convenient, pre-cut lengths of tape. SMD Double Splice Tape is supplied in short lengths, ready for use. After peeling off the upper tape, the raised dots of the clear plastic carrier engage with the sprocket holes and align the SMD tape ends perfectly with each other and the joining tape. The first adhesive tape then joins the SMD cover tape ends. The perforated center line of the carrier, which is later discarded, helps in folding the connector around the component tape providing further alignment and joining from the other side.