Max SN4 SN8 HDPE DWC Pipe for Drainage

 

 

Introduction to Corrugated Pipe Fittings for Drainage:

 

HDPE double wall corrugated pipes (double-layer twisted pipes) are one mould profile two layer extrudings. Applies to rain water drainage, sewage drainage in residential district, or pollutant and exhaust gas discharge as well as sewage drainage for mine industry, or organic pollutants drainage from people's life, agricultural drainage, low pressure irrigation and coalmine ventilation.

 

Features of Corrugated Pipe Fittings for Drainage:

1. High tensile strength, compressive resistance and well impact resistance;
2. Anti-uneven settling property, and can be applicable to soft clay shifting sand foundation;
3. Convenient for connection with non-breakable joint.
4. Smooth inner wall, high friction resistance, large quantity of water flowing.
5. Decay resistance, "green pipe",  avoid secondary pollution.
6. Light weight, easy for carrying and transporting, convenient for construction with low comprehensive cost.

 

Advantages of  Corrugated Pipe Fittings for Drainage  :

1. High density, good compression resistance and good impact resistance;
2. Good resistance of asymmetrical bedding, available being buried in the mollisol and quicksand;
3. Rubber ring connection, easy but no leakage in the joint;
4. Smooth interior wall and low friction, high flow capacity;
5. Good corrosion resistance and no environment pollution;
6. Light weight, easily transport and install, low construction cost;
7. Application: municipal sewage; rainwater discharge; floodwaters drainage; irrigation; ventilation for mine and buildings; industrial waste discharge.

  

Application of Corrugated Pipe Fittings for Drainage:

1. Civil engineering
2. Agricultural irrigation
3. Conveying system for sewage plant
4. Pre buried piping under highway
5. Ventilation piping for chemical industry and mine
6. Power telecommunication cable conduit
7. Bridge construction

 

Physical Properties of  Corrugated Pipe Fittings for Drainage:

Item	Data
Ring stiffness S1, S2	≥4.0KN/m²,  ≥8.0KN/m²
Impact strength	TIR ≤10%
Flexiblity	Smooth, no reverse bend and crature
Inside Heating Box Test	No multi-layer and crature.
Moving Rate	≤4

 

Specification Table of  Corrugated Pipe Fittings for Drainage:

Inner diameter DN/ID(mm)	Outer diameter	Depth of socket
200	230	150
225	255	150
300	340	210
400	460	250
500	575	300
600	690	340
800	925	340
1000	1210	400
1200	1430	400

 

 

Production line:

 

 

Customer Visit:

FAQ:

We believe quality is our culture,with us your money in safe,and your business in safe.

For more information,pls do not hesitate to contact us.