Lifting weight: 0.25~5t
Span: 4.5~6m
Lifting Height: 5m
Working Duty: A3~A5
Working Temperature: -25~+40° C
Power Source: 3pH, 380V, 50Hz or other under customer requirement.

BZ Type Pillar Jib Cranes are a cost-saving addition to integrated handling systems. In some cases, this handling equipment is often the most economical solution. This applies to storage yards, on loading ramps or in buildings where other equipment cannot be installed due to structural limitations.

BZ Type Pillar Jib Crane (up to 1000 kg)
Slewing cranes feature high load capacities and outreach in relation to their deadweight. The low weight enables the jib to be moved easily and the use of hollow section rail as the crane girder provides for very low travel forces.

BZ Type Pillar Jib Crane (up to 2000 kg)
The light-weight design and low-headroom jib make this pillar-mounted slewing jib crane suitable for universal applications in the medium load range up to 2000 kg.

BZ Type Pillar Jib Cranes are also available in low-headroom design
The low headroom dimension results in a lifting height gain of 290 mm compared to the standard design. Whether for low-headroom applications, modernization measures or changes in the use of the building, our "short" units are the perfect solution in many cases.

Advantages:
1). Improved ease of operation
2). Maximum operating safety
3). Easy assembly
4). Delivery including complete electrical equipment
5). Lockable mains connection switch

Crane girder:
The crane girder is of welded girder construction. This result in lower dead weight with a high degree of vertical and horizontal rigidity and small wheel loads being transmitted to the crane runway!

Safety feature:
Weight overload protection device, Top quality long time bearing polyurethane materials buffer, Crane traveling limit switch, Voltage lower protection function, Emergency stop system, current overload protection system and so on!

Design and construction rules:
All the standards which are required for the crane are the Chinese standard.

Painting:
Primer and finishing paint

Color: According to your demand.

Average thickness: About 100 microns.

Provide us with accurate measurement requirements upon ordering and we can offer the design and manufacture of non-standard products of various hoisting capacities and for various spans according to your special requirements.

Customer Care:
Our philosophy is that the customer should be happy with the system performance and enormous improvement in work environment. And our aim is reducing the labor inputs for eternity working together with customer and ensuring that the work is executed to the utmost satisfaction of the customer.
Henan Mine Crane Company concentrate to have positive and flexible approach towards customer need through its comprehensive solution and service capabilities, professionally and cost effectively. As a company whose success derives from mains fully 

Welcome contacts us by E-mail or online, you will receive our prompt and careful reply!