Mold latch lock with plastic injection mould component

Model:	ZZ171
Brand:	STRACK Hasco
Origin:	Made In China
Category:	Industrial Supplies / Machine Hardware / Mold
Label:	mold latch lock , hasco side lock , hardware mold
Price:	-
Min. Order:	1 pc

Inquire Now

Product Description

1.Material:steel

2.Product:mold component

3.Shaping Mode:Plastic injection Mould

4.Certification:ISO9001

Features:

1.Due to double-sided locking system, safe and reliable.

2.High-frequency heat-treatment,easy to process mounting hole on the tail of latch bar and control bar.

Installation Guidelines:

Please install the housing in parallel to the parting line first.

Before install the control bar, please cut it to the necessary length, form the bolt hole.Please tighten the screw when mold closed.

(Please note: Make sure in a fully position mold before fix the control bar , and eliminate the clearance between the control bar and locking roller.)

Please cut the latch bar to the necessary length , and installation in parallel to the parting line.

Please install the latch lock symmetrically, otherwise, it would be fractured with the unbalanced force due to only one side of lock set be forced.

Allows control of the mold plate opening sequence on mold bases, but not control of mold plate closing sequence function.

If mold need to maintain, please remove the latch locks first.

After installed, carry out a functional test, check whether the individual parts of the latch lock units moves smoothly, the stroke is applicable.Recommend testing on matched Molds machine or Injection machine, no lifting Machine.